Search:

Hi Don, turned out I did not get it primed correctly/enough. its now working. The presurre switch must be bad or the small tube off the switch plugged, because it wont stop running so I am going to...

Hello, that would mean taking the pump apart I believe? No I havent done that, so take the pump apart and try to spin the motor? Would i take the impeller housing off and try to spin it? Thanks Don.

Hi Don, thanks for the reply. I tried that but this has 2 inlets for the conversion to a deep well, I hooked the 1 inch pipe and the 1 1/4 inch up and turned it on but it did nothing. Maybe I needed...

Hello, I bought a shur-dri well pump used and wonder if it even works. It is an SD-520, and I just want to know if the pump is good or bad. I plug it in and it hums but I have no idea if its good or...

Hello, I have a 25 foot cistern/well, which I am replacing the line to my pump to. I am going to have to dig up around the side of the wall of the well to get to the pipe, I am concerned that when I...

OK, thanks. I am diggin up the line. It was sucking dirt still so it had to be cracked somewhere.The original line was a 1 inch galvanized, going into a 1 1/4 inch inlet on the pump. I am going back...

Hello, I have a shallow well jacuzzi jet pump which is new last year. I had some plumbers replace it and replumb most of the well pump piping in the well housing. Last week we lost water. I got the...