Search:

I'll try that, thanks Gary

will it be enough time for water to dissolve 30lbs of salt on 2nd run if I manual regenerate one after another?

After using the Fleck 7000 softner for few months, I have to said I had enough. I wonder how you people enjoy the "soft" water from this system. I'm not expert in water softner, but do you need to be...

got it. I have already install the tube insert which weren't install before. I'll check on next regeneration

Dittohead,

I'm not the expert as many of you here, so help me if you can on this question.

Base on your cheat sheet set BF to 22 with 0.25 BLFC = (22 / 4) = 5.5 gallons of water into brine...

Thank you Dittohead!

After little over 2 weeks of usuage, I do enjoy the Fleck very much. The flow rate were good and all the plastic smell were gone. The regenrate sounds were much louder compare with my old GE, so I...

+1

http://www.specsserver.com/CACHE/FILE2185.PDF

WHES30 is very similar to my old GE Smartwater Profile. It will regenerate on demond or on calendar up to 15 day max.

I thought my old GE...

1 out of 5 gallons of water.

The question I have is... I thought a RO system is a must if you are running a salt base softener. Water softeners do add sodium to tap water.. especially for those...

That's the point. As I said, the water is more than that amount....

Sorry, I'm lost. What do you mean of 3"s for aircheck assy??

There are more than 5 gallons on water in the brine tank. I'll do another regeneration tonight. I think if I wanna decrease the water...

Thanks Dittohead,

I just check the brine tank and found the water were covering the 3 bags of 40lbs salt. Is that look right?

18700

I also found this on the brine well cap. It looks like...

Great advise as usual, Dittohead. I do find the water unclear and plastic smell when the system first install... after few backwashes and regeneration, it is muh better now. You are right, the water...

The black system looks pretty nice. Just one question nf your cheat sheet. Is RR set to 5 min enough to wash off the salts? I mean the rapid rinse time.

By the way, I am experience water flow drop...

highly recommended 90 degree kit if you plan on running the pipes on wall and bring your softener closer to wall. I wish I had order the kit on my installation and now I'mm running my 7000 sideway....

Jason did. His setting is little different as yours so I like to adjust it

PS. Ah I see... you must set the time to 12:01pm first... no wonder..

18678

Got the system installed. Press and hold the up and down arrow to enter the setup screen. It only allow me to set regen time, hardness, DO and RC. How do I enter the other setup screen?

Thanks Dittohead,

I actually bought another unit for my partner :) same configuration.

Hi Dittohead,

Can you send me the cheat sheet setting? I prefer good water quality over salt saving :)

hardness 21gpg
iron none to very low
manganese none to very low
chlorine 0.7ppm
...

I prefer water quality over salt saving... lol I believe the above setting were for 8 lbs setting? what are the 6 lbs setting like? 16?

By the way, my partner is looking for a softener too and his...

Double post

Dittohead,

My 2.0 cu ft system will be install soon. Do I use the same cheat sheet from above post? I just re-set the hardness base on my water test result. My water usuage were 3 adults + a baby....

I think this is a good place:

http://www.qualitywaterforless.com/Fleck_7000SXT_Meter_80000_p/f-r80-70sxt.htm

It offers 32mm hi-flow distributor upgrade from std 1.05" for $12. most of online...

This is what I'm ordering:

Tank Color Option:Almond
Insulating Jacket:NO Insulating Jacket
Brine Tank Size:18x33 Round Brine Tank 0
Res-Care Feeder:NO Res-Care Feeder
Resin Media...

double post

thanks lifespeed. I'll order 1-1/4" MNPT with optional brass sweat to connect to my home 1-1/4" copper pipes.

I'll have the installer cut the exiting 3/4" pipes and use 1-1/4" through out the...