Search:

10-4 valveman. Hear ya loud and clear. I am going to go the route of the pump start relay. So to disconnect the pressure switch, do I just need to remove the tube that connects it to the pressure...

Since this is purely to feed an irrigation system that is capable of delivering adeuate flow and pressure with a continuous running of the pump, I did not install a pressure tank. During irrigation,...

So I have just finished installing and calibrating my do it yourself irrigation system. And after a few days of flawless performance, my pump is now acting up. Let me caveat with I have a digital...

Thanks all! I replaced the 3.0 nozzles (that came pre-installed) with the 1.5 and 2.0 that my calcs showed I needed and all is well! Just had to order the nozzles from Rainbird which took a few...

So I just finished my irrigation install - zones 1 and 2 both use Rainbird 42SA+ rotors. Zone 3 uses 32SA rotors. Both zones 1 and 2 work perfectly. However zone 3 is doing something strange. It...

One thing I'm going to try is to remove the old pipe/packer/foot valve and replace it all. Didn't want to do this since it will be 100' of pipe but oh well. Seems to be the next logical step if I...

First the data – I live on the coast in NC. I have a 2” well that was used for potable water for years until being annexed. I am converting this to an irrigation well. The well is 98’ deep. I...