Search:

It is hard to get ones mind around the idea that so many try very hard to make things harder than they are.
GEEZ, EASY MAN...

The brine line is a supply line to the brine tank for fresh water and...

The drain line often has a washer like item behind where the tube hooks on that controls the amount of water that is to flow, ie 2.0 gpm or 3.0gpm .. etc..
YES, THAT IS THERE, STILL, DON'T KNOW WHAT...

13797

ok...not sure if image will come out..this is my unit.
"a" goes to brine tank
"b" goes to discharge (waste as you have told me)
"c" is the output of unit to pipes for house when...

Please note the two lines just behind the control head, there is the smaller that goes to the clear bottle,
I SEE 1 (ONE) SMALL LINE THAT GOES FROM CONTROL HEAD (IF I REMEMBER CORRECTLY) WHICH GOES...

*************

thanks for the reply however, i already have this as well as 5-8 more i downloaded some time ago....

Drain from the softener is just that drain and it DOES NOT GO INTO THE BRINE TANK, it goes down the drain like the Washer goes down the drain.
OHHH, I SEE....IF YOU SAY THAT COMES FROM THE FLOAT...

THANKS FOR THE REPLY
Ok. Here is water softening 101. There are 4 basic cycles to a valve. Backwash...used to lift the resin bed and prep it for the brining cycle. Brining cycle...This is when brine...

There are two ways of timing the water going into the brine tank, the control valve opens a valve for a time frame to let water into the brine tank or the float assembly is set so that x amount of...

Sounds like the float assembly in the brine tank might not be closing when it should, it should reach a level and stop the water coming in like the tank on the toilet.
.THANKS FOR THE REPLY!!....I...

Most of those that have years under the belt have a business to run and are on service calls...
I FULLY REALIZE THAT. I AM BOTH IN THE AC TRADE AND AN ELECTRICIAN SO I CAN RELATE.

The system that...

*******************
...thanks for the reply, however, this must be a dead section of the forum as nobody responds to the question....are there any other forums that are "ACTIVE" and to which people...

Greetings all.

EDITED...SOMEHOW POSTED TWICE...SORRY!

Greetings all.....very new here,

.....i decided to connect a used rainsoft softener unit as being discussed here in make and model that has been sitting in my garage for quite some time.... what...

Greetings all.....very new here,

.....i decided to connect a used rainsoft softener unit as being discussed here in make and model that has been sitting in my garage for quite some time.... what ...