Search:

I got it out with some heat. I put an acetylene torch on it for a bit and it loosened up. I made the washers with what I could put together from a local hardware and it is up and running with no...

Thanks for the great info. One other thing if you don't mind. The plunger on the right side I can push in but can't get it out to change the washer. Other than prying it out with say a straight claw...

Ihave this same mixer and need washers for replacement. Also when it goes back how are the plungers to be positioned when the spindles is put back in. Any help Thanks, Jack

Ihave this same mixer and need replacement washers. What position should the plungers be in when putting it all back together Thanks, Jack