Search:

Thanks to all. I'll try the fluidmaster. Hopefully, it will help.

toilet is an Eljer 1.6 low flow. It was installed by contractors six months ago and already had problems earlier with tank leaking and supply line freezing up the other day.

Hi,
I have a vent in my bathroom where the heat blows out too much. The bathroom is in the middle of the house. Can I block the vent at the main trunk and get more heat in my children's upstairs...

Hi all,
The flapper inside my mom-in law's toilet tank is closing right after flushing, it's not enough time for a good flush or fill the bowl up. I've changed flapper, messed with length of...

Thanx guys. Turned up prv with water on , now at 60psi and didn't touch expansion tank reading 50psi. Washing machine and shower much better. One other question. I have electric power washer for home...

Hi All,
Would like to increase water pressure in home, but need the correct steps so I don't mess it up. I recently purchased a water pressure gauge and it's reading 45-50psi. I hooked it to the...

Thanks guys. My basement isn't heated or aired so I also don't want to waste it. I have the reflective tape you mentioned and will put it to good use. Have a good day.

Hi All,
Was in plumbing forum last week because of floods in basement. Now that it is straightened out I'm checking everything contractor is doing. HVAC guy installed new unit and there is cool...

Follow up. Code inspector came out today and I was telling him about the flooding. He said the plumbers weren't supposed to change the T/P valve on water heater to 100psi,but a 100psi pressure valve...

I'd like to thank all for their help. I'll let the new plumber know this and make sure he does it no matter what he says. I came to this site along time ago and just used to read the forums and it...

I'm not sure what the plumber did to the expansion tank. I do know I can't trust them. They tried to tell me that water pressure is same throughout neighborhood and I knew better. Here's a pic of...

Sorry to take so long to get back. I did confuse the T/P with the PRV. Attached is some pics. I told both the plumbers the expansion tank should be on cold water side but they said it doesn't matter....

I just tried and couldn't find it either. It is the prv on the water heater you're asking about??

Hi Redwood,
Thanks for reply. I can't get a picture but it's a Watt's regulator
model#M7211
set 100lbs.
set 180Farenheit
100000 btu/hr??
My water pressure was 90psi till reducer was put on....

I have plumbers working on addition to my home and they ran cpvc to addition. The rest of home is copper. When they finished and left,of course, the prv opened and flooded the basement. I have seen...