(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: ktthomas; Keyword(s):

Search: Search took 0.10 seconds.

  1. If you are going to do the math on the salt tank...

    If you are going to do the math on the salt tank then for accuracy sake i should tell you the tank is obviously tapered and the bottom is actually smaller at 12" x 14" and I measure the water line at...
  2. 17089 My valve is the Fleck 5600 SXT. Salt...

    17089

    My valve is the Fleck 5600 SXT. Salt tank measures 14" x 16" X 32" tall

    The white tape mark on the salt tank shows my water line after regen this morn.

    It ran for 8 minutes before...
  3. I think its going to be even less than that since...

    I think its going to be even less than that since my capactiy looks like it is now limited by the salt dose of 12lbs per regen or 8lbs/ft. On a 1.5 cu ft. system that only gives me 36k capacity....
  4. Well I think I discovered the problem but 1st let...

    Well I think I discovered the problem but 1st let me answer your questions;
    The unit is refilling at .5 gpm.
    After regen i get 1200 gal.
    The capacity is set to 48,000.
    I've been using about 2...
  5. Thanks for all the comments. I guess I was...

    Thanks for all the comments.

    I guess I was thinking I had more of an issue with some settings on the softener rather than iron already accumulating in the resin, since the softener was less than a...
  6. I have used regular iron out once about 4-5...

    I have used regular iron out once about 4-5 months ago. Diluted about 1/4 cup in a gallon of water and poured it in the salt tank and regenerated. Maybe I should be doing that more frequently ?
    ...
  7. Little iron still in water after brand new Softener installed

    First some basic background of my situation; I had my house re-plumbed in Oct of 2011 with all new PEX plumbing, water fixtures, toilets, tubs, water sofetner, hot water heater, etc. The only thing...
Results 1 to 7 of 7