Search:

Thanks for the reply. I've heard the refrigerator line before. I thought that since the bath group was going to be wet vented through the lav, the drains needed to be run in a certain order for the...

I have a bathroom group that has a toilet, single lavatory, and combo tub shower. The shower drain is less than 5 feet from the lav. I am planning on running the shower and lav with a 2 inch drain...

Thank you for hanging on through my many questions. Your reply before this one was so helpful and saved me from making the mistake that you cited above. So, my new set-up is a combination of help...

Here is what i came up with today. And yes, the previous poster was correct, i do not know much about venting. I came out of the washer box with piece of 2 inch PVC. Then i put in a wye that is...

The original trap was in the crawl space with the vent for the whole house being tee'd off of the main waste drain horizontally through the crawl and then the vent going outside the house where it...

I am running a new washer box. The original one had the water and drain on the wall. Since I have gutted the bathroom, I could install a new box, larger supply pipes, and proper 2 inch drain...

Thank you all so much. Looks like I will be going with the one inch pex line because I will be pushing that line through a wall and sill plate running at an angle to get into the crawl space. Would...

I noticed that the pex ID is about a size under what pex and cpvc is. That's why i was wondering if should run 1 inch pex. This is a small, summer cottage.

I was just planning to run a main...

It's inch and 1/4 line coming into well and 1/2 inch copper coming out and then reducing to 3/8 inch copper. The well head is just on the other side of the wall to where the pump sits. Well was...

It is really going to take some doing to get 3/4 inch pex coming from the well pump. But, i was just a little bit hopeful another plan would work. Can you ever go from a smaller pipe to a larger...

Bought a foreclosure house that was not winterized properly, so I have no idea how well the water lines originally worked. What I am doing is running new pex to most of the fixtures. This is a 900...