Search:

Thanks for all your help... got those voltage readings from when I did the test... oddly both the 9v battery and the 24v supply read 6.8v... will see if I can contact weathermatic now.

Thanks...

Hooked up one of the valves (tested it first against the test port... worked fine) to the MVP port and it came back with the same error. Cleared the error as per the manual, re-tested and it gave the...

ok, just tried the reset routing again.. still says the same, MVP SHORT. When I go to the other section where you set the zones it just says "0 zones" so there is no option to set on or off.

This...

Thanks, I will do what you said in the morning. Don't worry about the wiring, I just did it like that to show how it is connected. It is like this just to get it working and I will do the job...

Here are the pics as promised:

http://i205.photobucket.com/albums/bb112/jimsefton/1.jpg

http://i205.photobucket.com/albums/bb112/jimsefton/2.jpg
...

Thanks for the reply... I will post a pic shortly. I did try the factory reset using up/down/reset but I will try your method now.

Thanks again, will be back with pics soon :)

ok, I have done more research and as far as I can see the COM port is the common neutral, which needs to go to each solenoid. The other wire on each solenoid then must go to one of the 4 ports in the...

Not that I am aware of, although the system seems to think so. The instructions seem particularly vague in this area so please feel free to correct me.

Thanks for the reply.

Jim

removed*******