Search:

Been away from my project with travel for work.

Thanks so much!! Yes! Nice catch on the San-Tee!!

I will cut the final 3" pipe lengths one at a time and with consideration for fitting...

Here we go... This is the dry fit. Any feedback on the cleanout and any other comments are welcome... THANK YOU!!
http://i752.photobucket.com/albums/xx165/kwboat/53/2012-08-20_15-28-39_629.jpg...

I've got the 4' PVC into the the cast hub via rubber donut from LOWES. It was a snug fit and I used soap to help slip the PVC into the donut. The donut was 3" wide and I got the PVC down 4" in...

Alright.... I've cut the cast down to the lowest hub. *This is actually a 90 into the ground. *I cleaned out the hub and its ready to accept a rubber donut into 4"PVC. *From there I have a drawing of...

The framing is a non-bearing wall and will support design. As for the rest of the house there is only a kitchen sink that is connected to septic via an outdoor vented pipe with an access plug. ...

Thanks so much for the feedback..!! You are 100% correct - The main stack is consuming me...!! I'm okay with the new changes and think the trap vents will tie into a single within the attic and...

OKay - With what I've learned, its best to change the layout design to placing Shower/Lav/toilet on on the same wall and that wall is the best way to go. If I get too creative and press my luck and...

Edit... Old info - moved to new design below.

Thanks for taking a moment to help sort this out...! I see your point.... The shower drain distance yeilds an approx 4' slope to reach the main stack.

[Q] Since I have roughly 2' above,...

Thank you! Stopped by for a visit with mom.... I'm working on revised design to get closer to the existing vent for the lav, but the shower is a tough one... I've got the ceiling exposed and...

Edit... Old info - moved to new design below.

Hi... thanks for your response!! I've yet to find an exact section that addresses the distance from the toilet to the main stack - 2010 FL Plumbing code doesn't clearly address that however does...

Hello… Thankful to anyone that takes a moment to help… !! Learning tons and can't pretend to know it all... DIYr with more time than money...

Looking for direct feedback on my rehab project....