Search:

Just replying about the hammer set pins.

Looking at the pictures it looks like he used 3 of them. Also none look like they were completely set which may be a good thing as they can be removed. ...

Sure they "work", but are they cost effective is the important question.

One study in Florida estimated savings of 21 cents per month.

There is no energy credit that I know of that applies to...

I've installed them on 4 toilets and they worked well. As Terry said, so far so good.

They are especially useful for a novice as you can reset the toilet if you screw up.

I bought 2 extras...

I've ordered several 2 piece Drake Toto Toilets and never any damage. They double boxed the toilet pieces with expandable foam between both boxes. It made it a little difficult to unpack, but the...

I do this almost every week as I travel between two homes.

Before leaving I turn off the WH breaker then shut off water main to house.

Upon arriving I turn on the water main, go to kitchen and...

Yup, I was going to call them but when I found the number it was after 430 eastern, after they closed for the day. I'll call them tomorrow.

I looked up the warranty and it said to send it in for...

Reporting back about 8 months later.

The watts tempering valve intermittently fails to temper the hot water. One day it works fine, next day you have to crank in lots of cold water when taking a...

Just last week i had a long conversation with a friend in Michigan. He had a plastics manufacturing business that supplied parts mainly for US auto makers. A few years ago his business dropped off...

FIRST.....LET ME SAY, THANK YOU FOR YOUR SERVICE!!!

Hopefully she will be able to get someone locally to help.

I served from 1966-1970, back in the Viet Nam days. Back then one day, a civilian...

Yes. See Specs. It makes it a CST744EL Eco-Drake

Components:
• C744EL - Elongated Front Bowl
• ST743E - Tank and Cover only - Left-hand trip lever
...

What you most likely concocted was a UL violation.

Mine was a positemp from 2001.

I just got around to replacing my Cartrige. Last week I attempted to break it free with the plastic "tool" included in the kit. No way would it budge. I called Moen and they sold me the REAL TOOL...

[

Agreed,

BEWARE of just tightening the bolts. If tightened too much, you can crack or damage the flange mounted on the floor, especially if it is plastic.

If it is rocking then it probably...

Being I had a $100 Home Depot gift card and Disabled veteran 10% discount I just finished replacing the water heater for only $133 + tax, my cost. Better safe than sorry.

Since this was a...

I had same problem. It was more noticeable when bathroom exhaust fan ran for a while with the bathroom door closed. The negative roon air pressurevwas drawing the smell up into the room. My sewer...

What is the consensus about DIY replacement of a 12 year old, 6 year Water heater.

House is a single story Florida house on a concrete slab . *The heater is in the Garage at the same level as main...

We worked on 480 volt devices and removed equipment safety covers all the time without gloves / garb and mats. We just shut off the supply breakers to the devices first, just like you should when...

I agree.

My feeling is that Extended warranties are insurance policies. You should normally only insure that which you cannot afford to lose. I carry hefty liability insurance on my cars but no...

Call Moen at 1-800-289-6636 Describe the problem to them and they will send you a free replacement cartridge kit.

Just had same problem.

Jerry

Jim,

BINGO

Before retiring, I managed a service organization. We seviced all kinds of heavy duty equipment. One device had 3 phase 240 Vac 100 amp supply, and as long as the safety covers are...

Bump. Update.

The WiFi thermostats have performed well beyond my expectations. Actually I now never touch them as I find that it is easier to adjust via iPad or iPhone app even when at home.
...

If you look at the MAP test results, the 12" rough Eco Drake CST744EL is rated at 800 grams and the 10" CST744EL.10 is rated at 500 grams.
http://www.veritec.ca/uploads/WaterSense.xls

They both...

Check out http://sanisealgasket.com/

I've used them recently on 4 installations in my homes with excellent results. A single seal will work even if the flange is 3/8" below floor surface. If...

I just measured my CST744. Elongated Eco Drake, 12" rough toilet, 1.28 gal tank.

It was installed in a bath with 11 1/8" rough-in.

Bathroom is Tile wall that meets tile floor with no baseboard....