Search:

can you insulate around recessed lights or will they over heat any info will be helpful and what kind of insulation should i use

sounds like it wants to start but nothing happens. The ignition box makes a click but seconds later clicks again seems to turn off. Then couple minutes later it try to cycle again. any suggestions?

thank you will do

pilot light wont stay light I think it is the thermocouple are all thermocouple the same our do I need a special one for each different furnace

how deep do i install french drains and what kind of pipe do I use does the holes in perforated pie face up or down

how can I tell if my furnace has a heat pump on it it says it is a forced air high efficient natural gas furnace but says nothing about a heat pump on it. It was installed in 2000

I have recessed lights in the bulkhead of my kitchen I can fill the cold air dropping right out of them I checked in the attic above them and there was no insulation in the bulk head is it safe to...

the house had a new addition put on it5-6years before I bought the house witch included a new bath and kitchen I think there was a new sewer line ran because the main line from the second floor bath...

I have been watching it for 6 months through late summer to now and the level has not changed i can only fit my arm in the hole so i used a stiff peace of 10/3 wire to masure the depth it was about...

it makes my house stink some time there is no way to cap it the only opening i can see is a cracked out block at the bottum of the wall that leeds to the hole could i fill it with something? thanks...

I found a hole in my basement under a block wall. I shinned a light down into it and there was about 6" of water in it. The hole is about 24" round and I could see teracoto pipe running out of it....

I got a price instaled for37squareft laminat with double bowl stainless sink8" deep the guy told me $1424 for every thing. does this sound to costly

before or after the carpet that is the question thank you

Im putting second floor laundry room. What size does the drain need to be . Do I need a trap what kind how fare from opening should the trap be> thanks any help would be grate!!

pvc 4" inside

I was putting new toilet and I cracked the flange. the pipe is on the bottum floor and is concreted into the floor under till. Does it screw in or glue in. does anyone have any suggestions on what...

thanks for the tips. I think it is some sort of composite shit that looks like wood but I could be wrong.

i got tape on all my trim & base board and cant get it off anyone have any segestions on how to get it off easy??

where is the check valve and where is the feeder line?

my pump presure switch is20-40. It kicks on at 20psi but it wont pump past 38psi so it keeps on running. does any one have any ideas. I just put a new 20-40 swicth on it I thought that was the...