Ok well I thought I would answer my own question in case anyone comes along with the same question.
I have a sense that people are not yet familar with wireless thermostats. I found a series of...
|
|
|
Type: Posts; User: brunetmj1; Keyword(s):
Ok well I thought I would answer my own question in case anyone comes along with the same question.
I have a sense that people are not yet familar with wireless thermostats. I found a series of...
What does the wiring on the furnace control board look like ? Wireless capability requires a C (common wire) to run the wirless. Most old homes just have two or three wire
thermostats.
Well it turns out my furnace man has never run into a wireless thermostat before so he wasnt really sure but offered some suggestions.
One suggestion was to call honeywell which I will do later...
Thank You
This is not as straight forward as I thought it might be. So I will hire a professional to look at this.
My current thermostat uses a simple red wire/white wire system used for just the gas furnace. I recently purchased a wi/fi thermostat which also requires a common wire for power. It is very clear in...
Sorry I wasn't clear. I have only 1 outside vent on my roof of the second story side . While in the attic I discovered it does not go anywhere. It's broken. I never knew that before because the...
While in my attic looking for a place to run new electrical wires I noticed the air vent coming through the roof down to the upstairs bathroom
was broken. To my knowledge this was the only air vent...
Yes thanks,
What I am trying to avoid is buying both a new washer and dryer when I remodel. I want to use the existing kenmore stack washer/dryer as just a washer and buy a new dryer that can be...
Thanks everyone for your responces. They were very helpful
Would you have any suggestions as to how to find out?
It's a Kenmore Laundry Center 240 volt. I suppose I could write Kenmore?
Hi everyone,
I have a stacked washer dryer that currently requires a 240V outlet (or a 30 amp circuit I can't remember which ?)
I want to move this unit to another location and I want to use the...