Search:

Thanks for another good suggestion. The only problem there is the vertical drain/vent will be directly behind a set of drawers, so no way to expose the clean-out. However, I may be able to put the...

Right now the 1 1/2" drain connects with a wye to a 2" horizontal that goes into the main vertical stack. Sounds like i should just replace the old 1 1/2" with 2" into the 2" horizontal.

I'm replacing my existing tub (with tiled walls for shower combo). The existing drain and trap are 1 1/2". Should I keep the 1 1/2" or replace both with 2" horizontal drain and trap?


Thanks in...

THANKS! :) I appreciate the input. I guess the additional 2" only makes sense.

I posted a few days ago about this topic with no responses. I'll post once more hoping that someone has some input.

I'm installing a 2nd sink in my master bathroom and I want to know if the...

It's definitely a threaded filler so I need a threaded nipple. Do brass nipples come in different lengths or is this something that needs to be threaded to a custom length? (I'm wondering if this is...

What type of pipe material should be used for a tub filler nipple? Does the nipple have to be copper or brass? or can galvanized steel be used?


HELP PLEASE!

I am adding a second sink, 48" away from the first sink, to my bathroom. I'm wondering if I'm properly venting the new drain. I have attaced an elevation view of the proposed drain system. Does...

This valve (Kohler K-306) only has female threaded inputs. If it had the male ones I'd solder it for sure. From everything I've read it seems to me that the best bet is to pre-solder a short...

I recently bought a Kohler shower mixing valve. The valve inputs and outputs are all female treaded. I'm assuming that I can solder a copper threaded adapter to my 1/2" supply lines and then screw...