Search:

What type of wax ring should be used?

I did some searching for the use of "car wax" when toilet is new but I found no threads. Can anyone comment on how and why "car paste wax" is used on toilets?

I am wondering what material is best to use for a shim?

I am replacing some old toilets with new WaterSense toilets and I want to make sure I do the job just once and correctly.
I am looking for any tips / tricks / or gotchas for a install.
I should...

What other WaterSense toilets would make your short list besides the Eco Drake?

Thank you for your time and information. Pippin

How do you work on the lower pipes first? :confused:

I am looking for recommendations on an enzyme treatment product for eating up pipe sludge buildup.

I have heard these products can vary in number and type of enzymes contained in them and overall...

I searched and read every EcoDrake post on this forum and found no bad reports and an average opinion of OK with this model. I am wondering if the Eco Drake non-ADH has any short comings that might...

Krow,

I think you may have nailed it. The fill tube was only producing a small slow flow of water that was not enough to fill the bowl totally.
The flush of the upstairs toilet does undulate...

Would you please mention what exactly does Sanagloss add to a toilet?

I brought this up under another thread and I appreciate Redwoods response but if I have to start ripping out walls I would really like to have a second or third opinion.

Here is my situation, I...

I have a similar problem with only the basement toilet and I think it is a venting problem but let me toss this out to the group to see what you think.
Here are the details.

1. The upstairs...

Terry, would you please mention which 1.28 or dual flush systems have the largest water spots or less dry bowl areas?

Salmonica, you may find the following thread helpful in answering your Soiree question.

http://www.terrylove.com/forums/showthread.php?t=18679

Assuming the same no cost restrictions what is the best flushing 1.28 gpf toilet in your impression?

Terry, thank you for the detailed explanation. That is what I needed.

Assuming the same no cost restrictions what is the best flushing 1.28 gpf toilet in your impression?

Terry, just so I understand the only difference between a 1.28 and a 1.6 gpf toilet is only in how much water flows through the system?

I was thinking that if you send 20% less water into a system...

I was speaking with a toilet dealer about their 1.28 gpf offerings and they said that they are the same exact bowl/tank as the 1.6 gpf but have just been regulated to only use 1.28 gpf. My questions...