Search:

Looked like that on outside, but mine screwed down and up for flow adjustment like regular hose faucet. Just a couple of rubber washers in it. Could of repaired it if I had the right size. I did pick...

The Bradford I've got came with a regular faucet with the screw slot, good for safety, but a pain to open and close fast. I replaced it with a 1/4 turn ball valve. The inside diameter is obviously...

Thanks guys. I've got a couple of 3/4 full port valves in the garage, just need to get the nipple. Bradford came with brass valve. Stem is leaking. I drain about a quart of water or until it runs...

I'm just curious what the nipple the Mfg supplied is made of and how it's connected internally. Thanks for your help.

I assumed it was threaded but never have replaced one. No pipe or nut sticking out to get a wrench on while I twist off the valve, so I was afraid I might loosen whatever connection the drain valve...

Bradford White, 40 gallon gas residential, M440T6FBN, are those drain valves threaded or soldered. Or is it easier to just replace stem washer, mine is leaking a little from stem. 2 year old heater.

A Toto Toilet with the Unifit adapter would be ideal for this. You can get a good seal with one wax ring because you install the adapter first, then you would be able to level your toilet better...

One of my Guinevere's does the same thing. I put some oil on it and solved it most of the time. Iv'e ordered a new handle from Toto. The brass rod is to short coming out of the threaded area of the...

The shorter trapway on the unifits make it easier to unclog large objects if you remove the toilet. With the toilet on it's side, you can see straight up the trap from the bottom and shove a rag from...

I've had two Guinevere's for 10 months now. The plastic nut holding the handle on broke in half on one of mine also. Had to buy offbrand handle and use the nut from it to fix it. The nuts are either...

What do you guys think about using the toto unifit toilets for flanges that are plastic. The unifit design should relieve alot of the pressure from the flange bolts.

How long are wax gaskets suppose to last? Do you guys replace them every 3,5,or 10 years or just wait till you have sewage smell or see water leaking?

I installed a Guinevere today. First Toto owned. Great rim rinse,quiet, great fast flush, quick refill. So far no water splashing on seat.Sanagloss, elongated. When I ordered it at the plumbing shop,...

When I added a bathroom in Cypress, CA, Inspector would not pass toilet until it was caulked. He said it was to prevent sewer gases. I just installed a Guinevere. The Unifit makes it real simple to...