Search:

Okay, thanks.

We will be gone for more than a year from our home in Arizona. I want to lay up the water softner so it does not continue to process water until we return. I will obviously go to bypass on the...

That is good information. Interestingly, this pump is set from the factory at 30# on, 50# off. Someone before me increased the pressure and the on is 43#, off 63#. It builds to 63# without...

To bad I didn't know what that diaphram was for last week. $30 for a replacement with the rubber base seal. All back together now and running perfectly, with the same pressures - no change there. ...

I just looked carefully again at the inlet and hub and there does not appear to be an issue. Wouldn't I be able to see something?

I went a little farther. I pulled the pump and benched it. Broke the motor off the pump, which was easy, and inspected everything. The nozzle was totally clear. The impeller and diffuser were...

Okay, lots of views but no help. How about just this, which could eliminate one possibility before I start throwing parts at the pump?

There is a brass plug in the end of the pump case. The...

I have a Goulds J5SH 1/2 hp jet pump sitting at the base of a 500 gal storage tank which is filled by a submersible pump from the well. It is connected only to irrigation. We were out of town with...

It took a lot of thinning of the texture (pre-mixed) and playing with the air pressure and nozzle size, but i was definitely successful in blending the light orange peel between the old and new...

Well, I am going to find out tomorrow. I have the pantry, which was expanded by consuming an adjoining bathroom, ready to shoot as soon as I primer it today. I skimmed some additional finish mud...

Thanks for the suggestions guys.

I get the waving, but what's a british thing????

I am remodeling several rooms in my house. About 30% of the sheetrock has been removed and the walls and doorways reconfigured. The rooms were originally spray textured a light orange peel, then...