If you are only starting with 40 psi the heads won't perform well. Rotors are designed to have 45 psi at the head. So if you only have 40psi to start by the time the water gets to the head with all...
|
|
|
Type: Posts; User: greenmonster304; Keyword(s):
If you are only starting with 40 psi the heads...
If you are only starting with 40 psi the heads won't perform well. Rotors are designed to have 45 psi at the head. So if you only have 40psi to start by the time the water gets to the head with all...
NO...
NO valve-http://www.irritrol.com/valves/100centuryplus.html
NC valve-
http://www.irritrol.com/valves/valves_200bs.html
Relay-
http://ribrelays.com/
Any 24v transformer.
I think 110v valves will be expensive. You could...
I think 110v valves will be expensive. You could use 24v solenoid valves with relays and a trasformer.
Sounds like your system uses about 15 gpm. Thst...
Sounds like your system uses about 15 gpm. Thst csv has about 15 psi of loss. If your system was marginal to begin with lossing 15 lbs off the top would give you really crappy pressure at the...
Why not use a stainless clamp like an Ideal...
Why not use a stainless clamp like an Ideal Lox-on clamp or similar?
If it is a commercial grade dripline like Netafim...
If it is a commercial grade dripline like Netafim or Rainbird you could run the pressure to 60 psi if you wanted and it would work fine. If you are using somthing like T-tape you might have a...
The tank rusted out because it was in a pit that...
The tank rusted out because it was in a pit that was always damp.
Replacing tank on vfd
The tank for my vfd started to leak so I want to replace it but I am not sure what pressure to charge the new tank to. I wasnt sure if the vfd tanks get charged differently. Thanks in advance for...
You need to cut out the old coupling and replace...
You need to cut out the old coupling and replace with a short piece of pipe and one of the following knock on coupling, compression coupling, 4 90's, or slip fix.