(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: NealinNevada; Keyword(s):

Search: Search took 0.12 seconds.

  1. ONE pressure switch controlling TWO pumps?

    Hi folks,

    I am looking for some advice...I'll briefly explain my situation.

    I have a small ranch in New Mexico which has a water tower and a 3/4 hp submersible pump in the well. The well pump...
  2. Replies
    3
    Views
    1,687

    You are going to kill that pump with 20 cycles...

    You are going to kill that pump with 20 cycles per hour. It sounds like the bladder is gone on the pressure tank. You should have a schrader valve on the the tank. Turn the pump off and then relieve...
  3. Replies
    2
    Views
    2,410

    I put in about 200' of french drain around the...

    I put in about 200' of french drain around the perimeter of my place and I used the flex tubing but I also put a sleeve over the pipe. It is a cloth sock that keeps most of the dirt out, but lets the...
  4. Replies
    26
    Views
    4,447

    I've always set the pressure in the bladder when...

    I've always set the pressure in the bladder when all pressure is relieved from the tank (open a faucet and let 'er run empty) and the pressure pump is unplugged so it can't come on when you relieve...
  5. Replies
    4
    Views
    2,151

    In my Nevada place, I have a dc setup which might...

    In my Nevada place, I have a dc setup which might interest you and help you with your problem. My place had a setup like you have described when I bought it...worthless. I then built the system...
  6. Replies
    8
    Views
    2,010

    Bob...Thanks for the sketch...I can see the...

    Bob...Thanks for the sketch...I can see the safety side of your drawing and that was the approach I was thinking of. My major problems are these:

    1) I want to put in a system that will withstand...
  7. Replies
    8
    Views
    2,010

    Cistern pump control switch

    hi to everyone :) ! I need to control my well pump to fill my cistern (2500 gal plastic tank on a 30' tower). Currently I have a timer do it, but I need to automate the filling of the cistern by the...
Results 1 to 7 of 7