(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: drvnwell; Keyword(s):

Search: Search took 0.12 seconds.

  1. Replies
    12
    Views
    537

    I misspoke, it was the T&P relief valve, sorry.

    I misspoke, it was the T&P relief valve, sorry.
  2. Replies
    12
    Views
    537

    Expansion tank question

    The drain valve from my water heater keeps draining. I replaced the relief valve but that did not remedy the problem. I tapped the expansion tank and it appears to be full of water. It is a watts...
  3. Replies
    12
    Views
    724

    So I got everything set up with a 1hp shallow...

    So I got everything set up with a 1hp shallow well pump and 30' drop pipe with a foot valve. Everything is working great. I am getting about 4 1/2 gallons/minute. I let it run for over three hours...
  4. Replies
    12
    Views
    724

    Wet_Boots, That is my plan B if this doesn't...

    Wet_Boots,

    That is my plan B if this doesn't work out. I have a shallow well pump already available so I am going to hook it up and see what I get. The jet pumps are supposed to be good down to...
  5. Replies
    12
    Views
    724

    Thanks for the feedback guys! The suggestion...

    Thanks for the feedback guys!

    The suggestion to downsize to a 1 inch foot valve is a good idea. Will the 1 inch restrict the flow very much? My 1 1/4 inch pipe is assembled with internal slip...
  6. Replies
    12
    Views
    724

    My hole was augered to the water table(19'). I...

    My hole was augered to the water table(19'). I then dropped the well point in and went another 21'.

    So that is my plan. I will drop 1 1/4 inch pipe 30+ feet into the 2 inch and see what kind...
  7. Replies
    12
    Views
    724

    After the point was driven, I flushed it with a...

    After the point was driven, I flushed it with a hose. I could hear the water down to about 8-10 feet, but it didn't get any higher. I also back flushed the point with a clog buster for about 40...
  8. Replies
    12
    Views
    724

    Pump/driven well question

    I recently punched a driven well to 41 feet with 2" galvanized pipe with 5' well point. My water table is at 19'(so 22' in the water). I have a question about pump/pipe sizing. I am going to use a...
Results 1 to 8 of 8