(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: fajmerchant; Keyword(s):

Search: Search took 0.12 seconds.

  1. Same dilemma

    I've posted on a few other threads sans luck regarding this, but this sounds like a better-articulated description of the same problem I'm facing on what I finally identified as a Crane yesterday. I...
  2. Trying To Identify the Manufacturer of a Piece

    I'm desperately trying to figure out the manufacturer of a piece so that I might then discover how to fix a severe bathtub clog. The manner in which the linkage operates doesn't seem similar to that...
  3. Question for Clarification

    Thanks for the tip. Now, because it's the pop-up stopper variety, I'm assuming I have the spring at the base. Will that come up with a coat hanger, or is it fastened in a way that requires...
  4. Rod Out -- But Nothing With It

    Thanks for that diagram.

    I managed to truly muscle the rod with a pair of pliers and finally get it out -- it's thick brass, maybe 3 inches long. The problem is that whatever was attached to it...
  5. Overflow Shaft

    "The other end of the rod where it connects to the stopper mechanism has some play and is much smaller than the overflow so you can get enough of an angle on it to pull the rod up and out with the...
  6. Clogged Bathtub -- Difficulty With Shaft in Overflow Tube

    Hi, I have a severely clogged bathtub. After proper plunging (with the drain stopper removed and with the overflow airholes covered) failed to fix this, I decided to hand auger the blockage.

    I...
Results 1 to 6 of 6