(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: mialynette2003; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.39 seconds.

  1. Anyway to post a pic of the debris? No way of...

    Anyway to post a pic of the debris? No way of knowing what it is without seeing it.
  2. Your major problem is the iron. It is high. A...

    Your major problem is the iron. It is high. A water softener can remove that much iron but it is not recommended because of the wear and tear on the softener. So the next option is to have an iron...
  3. I recommend a chlorination/dechlorination system...

    I recommend a chlorination/dechlorination system with a 120 gallon retention tank. Most iron filter medias are very heavy and your well may not produce the flow rate to properly backwash the media....
  4. I agree with Reach4. All you need is a water...

    I agree with Reach4. All you need is a water softener. Clack and Fleck make systems that will give you years of great service.
  5. The test results look strange. Hardness is a part...

    The test results look strange. Hardness is a part of the TDS. So normally the TDS would be higher than the hardness but in your case it's the other way around.
  6. Replies
    8
    Views
    458

    Spent 13 years in the Austin area. In some...

    Spent 13 years in the Austin area. In some sub-divisions every home was preplumbed for a softener and in others it was an option. It's possible to install it in your garage. Reroute the main line to...
  7. Yes we can agree. EcoWater makes a screen with a...

    Yes we can agree. EcoWater makes a screen with a rubber washer attached to it. A customer had the same concern so I devised a way to attach the screen inline after the softener. Another way is to...
  8. Replies
    8
    Views
    458

    There are no set standards for running water line...

    There are no set standards for running water line thoughout the home. So you can not just tie into a water heater and expect to soften all faucets in the home. If the home is not pre-plumbed for a...
  9. I can see why you say it's a "trick" because it...

    I can see why you say it's a "trick" because it sure make iron disappear. Should of been a stand-up. LOL
  10. Replies
    4
    Views
    181

    It will take less than 30 min to load the media...

    It will take less than 30 min to load the media in a softener tank. If it comes assembled, a freight company has to deliver it and not UPS/FEDEX because of the weight. With a freight company, you...
  11. LOL. That's the way to stay out of trouble. I...

    LOL. That's the way to stay out of trouble. I tell folks that they have a 50 50 chance on those style units.
  12. Replies
    3
    Views
    167

    For some reason, it won't let me edit my post so...

    For some reason, it won't let me edit my post so here is the edited version.

    If you have gone a number of months removing iron from the water without using a resin cleaner (iron out) and now are...
  13. Replies
    3
    Views
    167

    If you have gone a number of months removing from...

    If you have gone a number of months removing from the water and now are trying to clean the resin, it could be the system is not rinsing the resin completely of the iron you are trying to clean off...
  14. You will have to use a resin cleaner with that...

    You will have to use a resin cleaner with that much iron. I use iron out powder in with the salt. A 2 CF will work great for your application.
  15. Do you have any multi shower heads or body...

    Do you have any multi shower heads or body sprayers? My first thought is a 2 CF system based on water conditions.
  16. Replies
    8
    Views
    458

    I would look in the phone book under water...

    I would look in the phone book under water treatment and start calling. If they are not willing to give you a price over the phone, most likely they will be very high priced systems. Look for a Fleck...
  17. Replies
    1
    Views
    139

    You would be better off with a Fleck or Clack...

    You would be better off with a Fleck or Clack system. Not too many people service the WaterBoss systems
  18. There's no trick. Just buy some Super Iron Out at...

    There's no trick. Just buy some Super Iron Out at your local grocery store in the cleaning isle and follow the instruction on the back. They have instructions for first time use and repeated use.
  19. Don't tell me that. I have to replace the resin...

    Don't tell me that. I have to replace the resin in a WaterBoss as soon as the parts come in. Well....not me....my service tech does. LOL Better him than me. He's still learning.
  20. http://www.waterboss.com/media/WB_Softener_v3_Manu...

    http://www.waterboss.com/media/WB_Softener_v3_Manual.pdf
    Here is a manual for the 3.0 version for the 700 series. They do have a manual for the 7.0 version but this should have the info on how to...
  21. Some programs allow a day override where you can...

    Some programs allow a day override where you can set it to regen say every 7 days no matter what. If your system has this feature, you can still monitor the water useage and have it regen at 2am.
  22. The only thing I can think of is to regen the...

    The only thing I can think of is to regen the system before it decides it's time to regen. Other than that, I don't think you will be able to do what you want.
  23. With the WaterBoss, I would not lay it on it's...

    With the WaterBoss, I would not lay it on it's side. This is a tank in tank system. You may end up getting resin the the brine tank or causing the media tank to get out of place. I suggust using a...
  24. Just send me an email. Too much to post here.

    Just send me an email. Too much to post here.
  25. I do not recommend using a smaller retention tank...

    I do not recommend using a smaller retention tank than 120 gallons if you have coliform bacteria. You want a minium of 20 minutes contact time to insure all bacteria is killed. Carbon can be a...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4