(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: erich; Keyword(s):

Search: Search took 0.14 seconds.

  1. Replies
    23
    Views
    3,387

    I used to go into aurora cycle all the time back...

    I used to go into aurora cycle all the time back in the day when i had my bike, distant memories...
  2. Replies
    23
    Views
    3,387

    cool, thanks! I got a no 3 wax ring, but with a...

    cool, thanks! I got a no 3 wax ring, but with a plastic horn, and brass screws, was hoping to do this tonight, but might as well wait another day and take another trip.. I'll hit up aurora plumbing....
  3. Replies
    23
    Views
    3,387

    thanks for the reply, i got it clean... i was...

    thanks for the reply, i got it clean... i was wondering if i stack the two spacers do i have to bolt them together first or can i just stack them loose onto the flange and screw the top spacer down...
  4. Replies
    23
    Views
    3,387

    cool... thanks jimbo! you're right, i put that...

    cool... thanks jimbo! you're right, i put that one extender in and it's still about 1/4" too low... so just use 4 bolts and nuts to secure the two together and silicone them? will that hold up? ...
  5. Replies
    23
    Views
    3,387

    think that sealant pro stuff would work?

    think that sealant pro stuff would work?
  6. Replies
    23
    Views
    3,387

    can i use anything other than silicone? like...

    can i use anything other than silicone? like construction advesive or this ultra pro sealant?
  7. Replies
    23
    Views
    3,387

    how would i bring the flange up flush with or a...

    how would i bring the flange up flush with or a little higher than the floor other than using an extender? is it possible to do without ripping the tiles up around the flange?

    Thanks
  8. Replies
    23
    Views
    3,387

    alright, thanks for the help... iv'e never...

    alright, thanks for the help...

    iv'e never worked on a bathroom before at all, let a alone doing anything with a toilet, before I started the tiling job, and use the extender after I did the...
  9. Replies
    23
    Views
    3,387

    how to connect an extender to the flange

    I just finished cement boarding and tiling my floor and I need to use an extender ring thing to be flush with the tile.

    Do I just use some bolts, or do I need to use some sort of adhesive between...
  10. really? that'd be great if that's it, i'll go...

    really? that'd be great if that's it,
    i'll go get another one and try it out... thanks!
  11. thanks for the reply and info... I looked a...

    thanks for the reply and info...

    I looked a little closer at the valve insert and it does completely comes apart, so I carefully dissasembled it and the thing was clean, nothing at all clogging...
  12. how to go about unclogging a valve?

    The valve must be clogged, but how do you unclog it. It's one unit and looks meant not to be taken apart. Can anyone give me the correct procedure for unclogging this type? It's the delta 17
    ...
  13. thank you for the responses, the valves are...

    thank you for the responses,

    the valves are wide open

    i did the adjustments per the owners manual, that didn't help at all.

    i took the valve apart and opened the shutoffs all the way and I...
  14. here are some pictures

    I don't know if this would make a difference or not, but the copper pipe on the hot side is at a slight angle coming out of the water shutoff i installed, would this hinder the hot water pressure? ...
  15. thanks hj, that's what i did and it was...

    thanks hj, that's what i did and it was surprisingly easy to do with
    a couple 45's
  16. Thread: delta valve

    by erich
    Replies
    0
    Views
    524

    delta valve

    there's a brass ring inside the shower side of the valve, this is to make sure the water first flows through the bath side, but does this ring also restrict water flow to the shower when it's being...
  17. problemes with water flow on delta one handle valve

    is there a way to adjust the valve to get better hot water flow? I adjusted it as much as possible and everywhere in between, but the flow of hot water is still almost a trickle no matter where the...
  18. low water pressure out of shower with delta valve

    is there a way to adjust the valve to get better hot water flow? I adjusted it as much as possible and everywhere in between and the flow of hot water is still almost a trickle.
  19. bathtub drain doesn't line up with existing drain

    My new tub fits perfectly within the cove area, but the existing drian is off about 3 1/2 inches from the new drain. Is there a code regulation that says the drain pipe that connects to the 'over...
Results 1 to 19 of 20