(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: rshackleford; Keyword(s):

Page 1 of 11 1 2 3 4

Search: Search took 0.12 seconds.

  1. Replies
    3
    Views
    505

    I design pumps and was hoping the manufacturer...

    I design pumps and was hoping the manufacturer would have a curve for the fan like a pump curve but I haven't found one.
  2. Replies
    3
    Views
    505

    Panasonic Inline FV30NLF1

    I would like to use the FV30NLF1 to vent my master bath and bedroom. Basically the master bath and bedroom are one big room. The bath has a shower, free standing tub, and stool. The bath is 6' wide...
  3. Yes this is the agreed fix for the screwup. It...

    Yes this is the agreed fix for the screwup. It sounds like the answer is the plumber can make it work but it won't be as easy as it should have been.

    The person paying for the service should have...
  4. So I guess the question becomes: can he do it? ...

    So I guess the question becomes: can he do it?

    And the answer is yes?
  5. It was drawn with the fixtures on the same wall. ...

    It was drawn with the fixtures on the same wall. The plumbers was off an entire room in the basement with ground work. The basement sketch is our new plan now that the work in the concrete is...
  6. I will do the best I can. Here are the pictures....

    I will do the best I can. Here are the pictures.

    22483

    22484

    22485
  7. Building House--Basement Ground Work Wrong--Help!!

    I am building a new house. The plumber messed up the location of the ground work in the basement. The basement bathroom is directly below the upstairs bathroom. They are both full baths.

    The...
  8. How should the two thermostats be set? should...

    How should the two thermostats be set? should they be the same or one higher than the other?
  9. Nuisance electric water heater over temp trip

    My hot water heater has a mind of its own.

    It used to only happen when we went on vacation but now it's about every three weeks.

    The water will get really hot and the over temp safety will...
  10. Replies
    2
    Views
    2,431

    yes this is a straight recirulation pump. it...

    yes this is a straight recirulation pump. it does run all the time. it has worked pretty well and is keeping the kitchen and mud room water at the ready.

    i am considering getting a timer for it...
  11. it still has tripped a few times. tbe last...

    it still has tripped a few times.

    tbe last thing i did was to set the upper thermostat just a bit higher than the lower. this seems to have taken care of the problem for about two weeks.
  12. i did not realize there were two thermostats. ...

    i did not realize there were two thermostats. the top one was set at "B" and the bottom was set to "Very Hot." i am assuming there was some sort of gradient setup and the bottom burner would heat...
  13. Update just took a huge bath and i am sure i...

    Update

    just took a huge bath and i am sure i emptied the tank. the red button was tripped again and no new water was being heated.
  14. Replies
    2
    Views
    2,431

    Laing SM-303-BSW Ciruculating Pump

    what kind of pump is it and what does it do? i looked up the pump on the Laing website and the links to manuals don't work. i can't tell if this has a thermostat or if it runs all the time.
  15. Hot Water Heater High Limit Switch Continualy Trips

    i just moved into my new house. the previous owner said he had problems with the hot water heater. he said he had to go down and push a little red button ever once in a while. it is an electric...
  16. Replies
    12
    Views
    17,483

    i got the what?

    i got the what?
  17. Replies
    12
    Views
    17,483

    i don't have that option. i have limited space....

    i don't have that option. i have limited space.

    we have been getting by with using Gorilla Glue to hold the adapter into the facet. it comes out from time to time and gets glued back in.

    i...
  18. Replies
    1
    Views
    624

    service line shut off tool

    i have never been involved with a service line shut off tool.

    are crimp tools okay?

    are freezers okay?

    what is better? are there problems with either?
  19. Replies
    0
    Views
    484

    cast iron in basement floor

    i am having some drain problems. i have had the roto-rooter guy out a few years ago and cleaned out about 15 feet of cast iron pipe in the concrete basement floor. it worked for a while. now its...
  20. Replies
    6
    Views
    1,312

    i might try to post some pics. maybe do it this...

    i might try to post some pics. maybe do it this evening.
  21. Replies
    6
    Views
    1,312

    plaster wall cracks? help!

    i have lived in a 1925 home from seven years. the walls have always had a few lines in them, but no real cracks. my wife painted right after we moved in and it seemed to hide them all. this summer i...
  22. Replies
    2
    Views
    1,515

    california master electrician????

    i am in north Dakota--oil boom country. we are getting a lot of out of state people coming to look for work. we had a recent applicant from California who wants to work in our electrical division...
  23. does it need to be a grinder pump or would a non...

    does it need to be a grinder pump or would a non clog be fine?

    are these systems uncommon?
  24. does it need to be a grinder pump or would a non...

    does it need to be a grinder pump or would a non clog be fine?

    are these systems uncommon?

    i am going into a gravity sewer. do i call my service a force service then?
  25. what manufacture puts together a system like...

    what manufacture puts together a system like this?
    what size of a sump do i want to use?
    what flows should i design for?
    how does the length of the force main (actually force service) change...
Results 1 to 25 of 275
Page 1 of 11 1 2 3 4