Search:

I need to make a dishwasher power cord.

New DW specs:
12a/1450w
Min 14g 167ºf

Current house wiring:
dedicated 20a circuit [12g]
15a split receptacle [w/disposal]

Chad, you have way too much free time trolling forums looking for fights. As the original poster I would ask JW to ban you from this post, as you bring NOTHING but a crappy attitude and a narrow...

Based on that statement this website should be shut down. I was under the impression this was THE place to "ask questions," so we can do it right.

You have never validated your statements as to...

15505
- My reasons for drawing 2 over 3 has EVERYTHING to do with the number of wire nuts. If you have never installed a Home Automation switch or receptacle there are things to be aware of:

1)...

Some of us come to sites like this to gain knowledge that is BACKED UP WITH EXPLANATIONS and REAL EXPERIENCE, not "do it this way or your a hack". I have owned several homes and have seen many...

A long ground wrapped around the screw IS one wire, one screw.

Is there a code that states '1 wire on 1 screw only'? If so I could:
- make the ground entering Box3 x-long, and wrap it around the screw, then continue on.
or
- Pigtail all the grounds together...

Yes, that is correct. There is NOT enough slack to re-join the original Romex in only one box, so having 2 boxes seemed to be the only way. It doesn't need to look pretty, since the whole config is...

Now I'm more confused. I thought that a drawing would help visualize my setup. Here is another drawing.

Notes:
* Existing Romex is approximately 2' from Box 3, and once cut there will not be...

Hello, I would appreciate any pro electricians to check my proposed wiring.

I need to add a new receptacle and switch to my AV closet by tapping into an existing circuit.

The receptacle will be...