(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: Teets; Keyword(s):

Page 1 of 4 1 2 3 4

Search: Search took 0.14 seconds.

  1. Replies
    4
    Views
    1,464

    with a 3 phase you can swap wires in the...

    with a 3 phase you can swap wires in the controller to check flow, what kind of control panel is in the house.
  2. Is there a float in this system, if there is it...

    Is there a float in this system, if there is it sounds like the float is working erratically.
  3. Replies
    4
    Views
    1,651

    I have one of these on a pump and dump...

    I have one of these on a pump and dump geo-thermal system, and my customer loves it. He says it's extremely easy to maintain, even with all his silt.
  4. would become a good irrigation pump on a drip...

    would become a good irrigation pump on a drip system if you didn't care about demand. good idea.
  5. Replies
    2
    Views
    892

    Bad check valve on the pump, or a leak in the...

    Bad check valve on the pump, or a leak in the drop pipe sucking air through the pitless adapter.
  6. Replies
    5
    Views
    1,407

    We use one of theses and they work very well. 2...

    We use one of theses and they work very well. 2 nice features are they see past torque guides and arrestors, and that you can use automatic static water level logging for tests more than a few hours...
  7. Replies
    8
    Views
    3,288

    Google Fleck 2510 manual. Use first link, and...

    Google Fleck 2510 manual. Use first link, and scroll down to page 15.
  8. Replies
    12
    Views
    2,028

    Could you post more stats on the well, such as...

    Could you post more stats on the well, such as depth, setting, pump, pipe, and mineral quality.
  9. Replies
    9
    Views
    2,925

    I would check for a dirty pressure switch or...

    I would check for a dirty pressure switch or nipple leading up to it, not allowing the pressure to read as it should.
  10. The water pressure is way too high and should be...

    The water pressure is way too high and should be adjusted.
  11. Replies
    7
    Views
    4,991

    Yes, you can cut the plug and with the power off...

    Yes, you can cut the plug and with the power off attach the 2 power wires from the plug under the terminal screws for the well pump and attach the ground wire from the stenner pump plug to the ground...
  12. Replies
    6
    Views
    786

    If the pump runs correct amperage with no water...

    If the pump runs correct amperage with no water delivery at the outlet with the water level in the well going down, I would suspect an underground leak and would be prepared to do some pressure...
  13. Replies
    10
    Views
    1,265

    Maybe I missed this in reading, but where do they...

    Maybe I missed this in reading, but where do they say it is a 10gs05 pump. If it's bigger that could be a potential problem.
  14. Replies
    3
    Views
    864

    Do you have any water treatment in the house? Was...

    Do you have any water treatment in the house? Was a recovery test done on the well? Did they check the static water level?
  15. Replies
    1
    Views
    2,756

    7.8 Amps is typical.

    7.8 Amps is typical.
  16. Replies
    4
    Views
    2,676

    You should have a yield test done on the well to...

    You should have a yield test done on the well to see what your current production is. Maybe call the town hall and see if they have a record of when the well was drilled.
  17. Replies
    4
    Views
    2,676

    How many gpm are you using. If the water level is...

    How many gpm are you using. If the water level is 212ft, then you only have approx 60 gallons stored in your well at that pump setting. If you have a low yield well that 60 gallons can go fairly fast.
  18. Replies
    1
    Views
    1,155

    I would suspect the well of running dry first. My...

    I would suspect the well of running dry first. My second guess would be the thermal overload on the motor going off. The easiest thing to check would be to check the pressure switch nipple or tubing...
  19. I would check the well supply and double check...

    I would check the well supply and double check that the well can provide the sustainable supply that you need.
  20. Replies
    1
    Views
    743

    Do you have a shallow well or deep well jet pump....

    Do you have a shallow well or deep well jet pump. It sounds like the jet assembly is plugged and needs to be cleaned out.
  21. Replies
    3
    Views
    940

    Is it possible this could be a 1/3 Hp pump? I've...

    Is it possible this could be a 1/3 Hp pump? I've run across a couple through the years. I know they don't use motors of this size anymore, but I remember that they consistently pulled 3.7 amps on a...
  22. Thread: air in the lines

    by Teets
    Replies
    9
    Views
    1,500

    I would check the static level in your well, and...

    I would check the static level in your well, and have a recovery test done. I wonder if you're running out of water as the unit is backwashing and the pump is gulping air and sending it into the well...
  23. Replies
    1
    Views
    619

    You'd most likely lose the prime in the pump if...

    You'd most likely lose the prime in the pump if you shut off the breaker. You have to either replace the broken line, or find and repair the leak, then re-prime the system.
  24. Replies
    4
    Views
    2,471

    What kind of tank do you have. If galvanized it's...

    What kind of tank do you have. If galvanized it's probably waterlogged and needs to be drained down and air added. If it's a bladder tank, the bladder may be no good. You may be able to add a...
  25. Thread: Pump Problem

    by Teets
    Replies
    11
    Views
    1,378

    You have a low producing well, and are drawing...

    You have a low producing well, and are drawing the water level down in the well to the pump intake level and are drawing in water that the well is producing at where the pump is set. The reason you...
Results 1 to 25 of 87
Page 1 of 4 1 2 3 4