(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: Anthony Curtas; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.12 seconds.

  1. Thanks Terry!

    Thanks Terry!
  2. Weird -- the new Dartmouth doesn't look like that...

    Weird -- the new Dartmouth doesn't look like that one at all. No wings on the side and a much more square top:

    http://www.totousa.com/ProductDetail.aspx?ProductID=499

    I guess they changed it...
  3. Is that the only "standard" Moen valve in old...

    Is that the only "standard" Moen valve in old homes? Not sure how prevalent they were. My house was 1978 and my valves look just like that (I know they are Moen because all the trim and sink...
  4. Thoughts on Toto Dartmouth pedestal lav?

    Hi all,
    We have a Dartmouth toilet in our MBR. For aesthetics, we are looking at two pedestal sinks with a small cabinet between them and a small accessory shelf rather than a full double vanity.
    ...
  5. Well I may be in luck. I found some old pictures...

    Well I may be in luck. I found some old pictures I took of the stud bays during my kitchen remodel (to check for wiring, plumbing, etc that could be in the way).

    On the ones that contain the...
  6. Sorry, my drawing was pretty crude. Traps...

    Sorry, my drawing was pretty crude.

    Traps would be in the normal spot under the sinks. It's joining them and tying into the old tub drain that I'm worried about.

    Sadly that drain is likely...
  7. But I would need 2" vent, right? I could vent...

    But I would need 2" vent, right? I could vent both separately and join them in the attic, if necessary, or higher up the wall. We're not doing in-wall medicine cabinets and it isn't load bearing so...
  8. Hmm, the other tub in my house is 1-1/2", so this...

    Hmm, the other tub in my house is 1-1/2", so this one likely is too. It is that I can't have two fixtures drain into a 1-1/2"? But one tub is fine?

    I have easy access to the attic, so I can vent...
  9. Basically I was trying to draw the picture above,...

    Basically I was trying to draw the picture above, but in the cabinet. The difference being that I'd have to turn the top of the double fixture fitting into the wall with some 45's to tie into the...
  10. Hmm, came across this picture here while looking...

    Hmm, came across this picture here while looking into the double wye / cross fittings.

    Looks like this was exactly what I was thinking with all the fittings in the wall (so more under-counter...
  11. Remodel Q: swapping a tub location for a vanity

    Hi all,
    Doing some layout work on a remodel for later this year. One of the options we like has the double vanity moving where our existing tub is.

    Second floor, and I'd rather not pull the...
  12. Replies
    1
    Views
    508

    We're leaning towards Moen based on features and...

    We're leaning towards Moen based on features and trims available.

    Anyone have an opinion on their Moentrol 3330 valve?...
  13. Replies
    14
    Views
    1,095

    We have a Promenade that is comfort height,...

    We have a Promenade that is comfort height, round, with sanagloss and now a Dartmouth that is comfort height, elongated, and no sanagloss (not available).

    They look the same and so far are...
  14. I have several sets of tank bolts, supply...

    I have several sets of tank bolts, supply washers, and bolt caps, but no flange bolts. I might buy an extra set just to keep in my plumbing bin.

    Thankfully Ace is on my way home from work.
  15. Replies
    1
    Views
    508

    Shower and Handspray Valve

    Master bath remodel just started in earnest. We have a plan: walk in shower, Toto Dartmouth toilet, clawfoot tub, and double vanity. No major plumbing relocation although drains and supplies will...
  16. It's hard to stay mad at them. It really is a...

    It's hard to stay mad at them. It really is a superior product (and it least it wasn't made in China). It looks great, but I couldn't finish the install last night due to lack of flange bolts. The...
  17. We ended up getting an Eco Dartmouth. It looks...

    We ended up getting an Eco Dartmouth. It looks great and I'm going to temporarily install it tomorrow (the master bath remodel won't start until next year).

    I am a little miffed at Toto USA,...
  18. Heard back from Toto (real fast after I finally...

    Heard back from Toto (real fast after I finally contacted them).

    Basically all one piece units are made in GA. Some parts of two piece toilets are as well. She sent me a pdf of all the "Made in...
  19. Anyone know the current lineup of Toto's made in...

    Anyone know the current lineup of Toto's made in the US plant?

    We're trying to buy USA first as a rule (don't care who owns the company, I'd rather support US workers with foreign profits than...
  20. Thanks guys. We have an ADA, round Promenade...

    Thanks guys.

    We have an ADA, round Promenade in our downstairs bath and an eco-Drake (low, elongated) in the kid/guest bath.

    We're leaning towards the Dartmouth, I just didn't know if there was...
  21. Recommend a quiet toilet (Toto preferred)

    Well we're sold on Toto after two upgrades and two very happy results.

    One more to go, as part of a larger master bath remodel. However that is a year or so off and the wife wants to upgrade the...
  22. After a thorough inspection, the toilet rocked...

    After a thorough inspection, the toilet rocked just a small bit (it's a slate tile floor, so it's not ruler flat). I picked up a Bigfoot II a while back (silicone floor gasket), so we installed...
  23. Hi all, Just got around to fixing this. To...

    Hi all,
    Just got around to fixing this.

    To answer some above questions:
    1) the toilet with no wax ring sits on the floor fine
    2) the closet flange is above the tile and is thicker than normal...
  24. Replies
    4
    Views
    884

    Oh and just for reference: it is a 1.28GPF short...

    Oh and just for reference: it is a 1.28GPF short height elongated with sanagloss. I read here and elsewhere that this combination wasn't available (of course that might have been accurate at time of...
  25. Replies
    4
    Views
    884

    New Toto Drake arrived!

    Just got it yesterday. Had to break out the jackhammer to free it from its packaging. Toto is serious about not losing anything to shipping damage :)

    Hope to install tonight or tomorrow. Big...
Results 1 to 25 of 45
Page 1 of 2 1 2