Search:

Sorry Im an electrician, I guess my terminology is off. I understand that these fittings will not be fitted all the way with my dry fitting them. I dont see it being a problem other than my...

so just the arm is wyed backwards? everything else looks good?>

Really sorry for the crappy pictures. everthing is 2" except the actual vertical vent piping. how do the "t's" and sanitees look

this is the drain/vent stack in the corner.
18070

Here is a better picture of the re-vent on the washer arm. my thinking was that the air would be on top and easily flow upwards this way? Can you clairify with this better picture?
The other "t's"...

well ive got it pieced together without glue an strapping for now

- 1/4" drop per foot on washer arm
-trap 5' from its vent
-vent connection well above 42" from floor
-washer "T" connection...

This picture and your explaination make a lot of sense. I plan to copy your first picture post. I do have one last question though, since my trap arm will be about 5 feet should i place the vent T...

Im confused so that is the height where the vent needs to attach or is that a measurement for the washer stack height?

Judging from that picture, i am assuming the 42" is the minimum above the washer trap arm that the vent must connect? And that a trap will be connected after drywall for the sink?

Your help is greatly appreciated Terry. If I follow you correctly, you are saying to add a "T" before the Washer trap, and run a vent up, and back over to my existing vent and tapping into it with...

So swapping the location of each with the sink on the top would be fine?

180451804418043I am planning to move my existing washing machine stack to a different wall, and adding a drain for a utility sink. on my existing layout is the T with a seperate threaded cap my clean...