(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: barbourdg; Keyword(s):

Search: Search took 0.17 seconds.

  1. Replies
    1
    Views
    496

    Anybody have any ideas? Is spray foam the only...

    Anybody have any ideas? Is spray foam the only option we have for underneath? The bottom of the tub has a little flex, so we can't just lay it flat on the concrete. So far spaying foam and...
  2. Replies
    1
    Views
    496

    Insulation below Copper Bathtub

    Question, we are ready to install our Copper "drop in" tub, and was curious if anybody else has worked with copper tubs?

    The bottom of the tub has some flex, so we need to use foam or something...
  3. 18999 Still tweaking, but here is the basic...

    18999

    Still tweaking, but here is the basic design I created in Photoshop. Still debating on (4) individual volume control valves or a 3 way valve. In this picture I am using a push button...
  4. Still little confused. We have a choice of 3/4...

    Still little confused. We have a choice of 3/4 or 1/2 lines to use for the thermostatic valve. If we use the 3/4 valve, we can either go with 1/2 or 3/4 volume controls. All of our devices...
  5. After the 3/4 valve, do we use 3/4 or 1/2 volume...

    After the 3/4 valve, do we use 3/4 or 1/2 volume control valves? We have to convert our 3/4 line to 1/2 at some point before the device.
  6. Hey Guys, thanks again for all the info. We did...

    Hey Guys, thanks again for all the info. We did finalize the plumbing this afternoon. We're going with the 3/4 to the valve.

    In the end, we're talking about 2 hours of work, to reroute the...
  7. 3 minute shower doesn't sound good. LOL By...

    3 minute shower doesn't sound good. LOL

    By running only 2 items at once we would bounce between 5 gpm and 7.5 gpm. If we upgrade to a 75 gallon tank, perhaps we can get 7-10 minute showers. ...
  8. Just checked with the city, and our PSI averages...

    Just checked with the city, and our PSI averages between 65 to 85. Since we live right by a pump station and a ground level water tower, they think it's pretty high. They're sending somebody by...
  9. Sounds like I should go with the 1/2 Thermostatic...

    Sounds like I should go with the 1/2 Thermostatic Valve, and just limit my shower to 2 body sprays and one other device running at the same time.

    Thanks
  10. We were actually thinking about getting a new...

    We were actually thinking about getting a new water heater anyway, so we can upgrade.
    Thanks
  11. The Kohler body sprays are 2.5 gpm, we're...

    The Kohler body sprays are 2.5 gpm, we're installing either 2 or 3. We would only have them going with one other device at the same time.

    Since all the main lines are 3/4 to the bathroom, do...
  12. We haven't bought the valves yet, but here are...

    We haven't bought the valves yet, but here are the options:

    Pressure Balancing Valve (Rite-Temp)
    3/4 Valve - 13.0 gpm
    1/2 Valve - 5.0 gpm

    or

    Thermostatic Valves (Master Shower)
    3/4...
  13. From what I hear my city averages about 60 PSI.

    From what I hear my city averages about 60 PSI.
  14. 3/4 inch supply line to master bath, but 1/2 inch line at shower valve?

    Need some help with our bathroom remodel.

    We have 3/4 supply lines coming into the master bathroom (sink and shower) and about 5 feet of 1/2 inch to the bathtub. We are doing a complete...
Results 1 to 14 of 14