Search:

The Toto toilets that i've installed do not have the rubber spacers and yes, many times the toilets that i've seen crack as well are the ones that are too tight and have no wiggle room if pressure is...

Do you have a picture of the Oval tank? I've only had issues with one old toilet tank where the porcelain was almost too thick for the clip. Let me see what you're dealing with.
John

The tank truss product that i'm showing here is actually something that we fully endorse at our shop - We've seen up to a 1 million dollar insurance claim from someone leaning on the back and...

This is still a 12" rough in toilet. The manufacturers make the toilets universal these days. So a real 12" rough in will have a 1.5"-2" gap from the tank to the wall if the flange is a true 12"...

Do Not Over tighten!!! 1"-2" is way too much wobble but just make sure not to over tighten.

We use mostly Kohler at our shop. I'm not a big fan of the AmStan products currently.

Really with the three point system you shouldn't have an issue with locking. Usually that will occur with the 2 bolts. I would say that you may have the wrong gasket size in the middle. Rock...

DO NOT OVER TiGHTEN!!! Over tightening will cause the toilet to crack. At our shop we use a toilet tank stabilizer by a the tank truss. It's the only product I know of that will stop the wobble. ...

You do not want to over tighten. If it already feels "snug" then either the wrong gasket was used or the toilet design is just this way. As seen in the other posts regarding this issue we use a...

Hi Brian,

The only product we've found at our shop to fill this gap is the toilet tank stabilizer by tank truss. Before this we had been making things up to put behind the tank and filling the...

Hello, I'm a 4th Generation Plumber and we've finally found a useful product to stop this rocking issue and stabilize the toilet tank. It's called a toilet tank stabilizer by TankTruss. It's...