Search:

Past couple of months, I was experiencing some pain that sounded/felt like sciatica, and my primary doctor sent me to a neurologist. The Neurologist did some basic testing, and scheduled this EMG...

It would certainly look neater if the tile went behind the vanity. Can't you just tile so just maybe 1/2 inch or so of tile will be under the vanity all along it's perimeter and still be able to use...

I think a "little" penetrating oil on that chrome tube where it enters the trap adapter sticking out of the wall should free it up enough to pull it out with a gloved hand.

OK, so last night my wife points out to me that the floor is wet behind our Kenmore elite fridge (made by LG); I pull the fridge out away from the wall and see something I had to look at more than...

Don, for what its worth, I've been using that same Zep stuff for years. It is not expensive at all; probably much cheaper than the yeasr I've seen in the supermarket. Zep is 9 bucks or so for 6 bags....

No, youre NOT stupid.

I agree with Don; start another thread. Got to go outside now and Mo zee lawn. Voir Don, Je parle francaise aussi:o

Don, you really have a way with words;)

I think you better get him to either give you aan extended warranty in writing to cover that pump motor and labor or have him put another in right now. I would prefer the latter if it were me....

do you have this info already?


http://www.franklin-electric.com/media/documents/M1311_60_Hz_AIM_Catalog.pdf...

Don lives where they used to shoot (maybe still do?) cattle rustlers. He shoots from the hip, like I do, but I think he was only jesting with you and meant no offense at all.

To me, that rotary switche is used in an auto reset function if the unit trips on overload, to allow th emotor to cool for x amount of minutes, currently set (hard to see in photo) at 2,=45...

to be illegal and jump out the meter? Old meter may not fit new meter pan?

maybe yah fei means yuk-yuk?

but it was built to code and had the max lamp wattage that they indicated was safe to use. If it killed me somehow, everybody else's ass would be covered cause it met...

If you are referring to my post number 48, here are some photos20371203722037320374

I promise you that the bulbs in there were 60 watt incandescant mini reflectors that were shown on their boxes...

Don, I read his cousin Goober took her out after the race

Don speaks big truth here. that burned connection caused many current overloads to the motor and may have damaged it. I think he gave the correct advice in his previous post when he said to call in...

Maybe Terry can combine these 2 threads if you ask him to if that's what you want.

It's easy to lose control sometimes with posting. In the John Bridge tile forums, they will scold you (in fun)...

I thought I was losing my mind (probably am anyway), but then I realized you started another thread, same topic, but named different. your other thread was named "I picked up a used pumptec that...

WHY is that wire nut in the first photo burned? that can't be good, and there must be/have been a bad connection which would create a voltage drop across it making the motor pull too much current...

I can agree 100% without hesitation here with every word of advice JW gave you on this. Replace that cable after everything you have described. I would. (Not that JW needs any support here, lol).
...

well Terry is practically your neighbor.

Don, Goog;le is your friend; use it: http://www.sprinklerwarehouse.com/Toro-Irrigation-Valves-Replacement-Parts-s/7343.htm.

http://www.toro.com/sprinklers/valves/inline/53709.html

I've bought...

To be honest, when I sw your last post, I did not know exactly waht it was, and a search for Malco Coax compression tool found me this, which is th same as your video, but in German...

Malco does make some nifty tools; Is that an attachment for their/a power unit?

Kind of hooks like a hand compreesion tool for coax, but it has that slot maybe for putting a crimped end on flue...

I created this thread to avoid offending the moderator (any more than I might have) in the other forum. Glad I did