Search:

Its a submersible Pump with vertical float, so i want to get it as vertical as i can so it never gets stuck and i am going to be installing a battery backup sump that all needs to be somewhat level....

I am using a Sump Pump. Thats why i am trying to get the bottom of the basin to be nice and flat instead of having the sump pump sitting wierd.

I think the ground water is pushing up on the...

After reading a number of different posts...

I have read that people drill a number of small holes at the base of the sump basin to allow water to enter and not "fill up" around the basin before...

Thanks for the reponse, but the one currently installed is a pre-fab basin. Looks like a standard one seen in most stores...So installing a new one would probably bring the same problem with it.

Hello all,

I noticed the other day that the bottom of the sump basin had "bubbled up" and it looked like an air pocket under the base. I tried to push it back down into place and water would come...

The supply duct for the 2 rooms in question are 5" round duct once they come off of the trunk line. I am going to be taping all the connections, but before i do that I think a couple of them need to...

Hey,

Well i have got the humidifier fully installed and it works great, only took about 5 hours to bring the whole house humidity up to the requested range.

I installed the Flow through...

Hello all,

Here is my problem.

I have a 2 story house and half of it (yes the in-sun side) get warm very quickly and stays warm and the 2 rooms on the other side are always much cooler (the...

Perfect, thanks for the quick help.

Just curious, is the reason it has to be above the coil (if it was a heat pump) is just because of the heat needs to pass throught the humidifier?

Since mine...

Its an all natural gas furance, the only add-on is the Air conditioning A-coil (its just for ac no heat pump)

It is a natural gas furance (about 5 years old). So does that matter is the bypass is above or below the A-coil?

Hello,

Im in the process of installing a new humidifier, however, due to the way the furnace was installed the Furnace output duct has the A-coil mounted about 14" above the furnace top and this...