Search:

Thanks Bob.

I'll call and order the National.

Have a great day. :)

Charlie

Thanks for responding Bob.

I purchases the Myers HR50S from Pumps and tanks.com. I just received an email from them regarding a price check on the product. It informed me that they no longer carry...

Haddy folks,

The other night we had a hard freeze. 19 deg I think. In spite of insulation some PCV pipes burst, but no big deal.

The real problem is the head on the Meyers HR (50S I think)...

Thanks Gary,

Picked up a new switch this evening. Lable says it's pre-set at 30/50. Guess that's the best setting. I'll hook it up in the AM. BTW, the price at HD was less than I recalled, $16.99....

Thanks Jim,

Have a great day.

Charlie.

Thanks Gary,

If I get one that set at 40/60, will it be advisable to leave it at 40/60 and increase the air to 38 to get stronger water pressure. Or would the Meyer's 1/2 hp pump handle 60 psi? I...

Well folks, appesrantly the switch is bad. Looking at the switch from the end where the pressure switch tube connects the pair of contacts on the left seem to make contact just fine, but the contacts...

Bob,

I dropped a waited line in the well. The bottom of the well appears to be at 33' below ground surface with the water level at 11' below ground surface. Including 3' the water must travel from...

The water dies again now after running about probably 8-10 gallons this morning. Sure hope I get what ever the problem is fix before I really loose it.:eek:

Thanks Bob.

Took your advice and opened a valve until flow was established. It was open about 7 hours. As I reached to close it before going to bed it began flowing. Kind of a relief but still...

Thanks Bob for responding.

All I really know about the well depth is that the drillers reciept from 6 years ago says "shallow well 29' deep". In the morn I'll get some light string suitable for...

I have a Meyer's HR series 1/2 hp Jet pump. It's about a 1 1/2 year old. And a 29' shallow well. not
sure if that means the pump needs to draw 29' or that the well pipe is down 29'. The out let the...

:) The O ring worked like a charm. Everyone have a great day:)

My Jet pump is leaking at the top where it gets primed. The pump is mounted on top of a 40 gal. precharged tank and the lines between the tank and pump are PVC. Even using teflon tape I can't stop...