Search:

I use the water cop


http://www.alarms247.com/watercopsystems.aspx

Trying to find a leak in bathroom. Is there a dye that the pros use that won't stain a tub? If I use a dye in the tub water then I will know when I see the dyed water on the unfinished ceiling...

I went to 3 plumbing supply places and they don't carry the thick wax rings W/O the horn. It looks like I will have to use 2 thin ones. So you are saying I should place the first ring upside...

I can't seem to find a thick wax ring without the horn on it. Do they make one?

The horn (Right term?) on the toilet is just about level with the base of the toilet. Maybe 1/16 lower at most:

http://i1002.photobucket.com/albums/af150/toiletfotos/IMG_0248Small.jpg

The I.D....

Should I mount the pedestal sink to the wall first and then install the faucet or install the faucet in the sink before I mount it to the wall?

Well it's time to buy a new faucet for the new bathroom. Any recommendations? What should I stay away from?

Thanks!!!!

I am installing a new sink and toilet. Should I use the steel braided lines for the water feeds or do you recomend something else? I noticed at Lowes that the steel braided lines are made by Watts...

You can replace it yourself with a Flushmate system:

http://www.flushmate.com/changeout.asp

Seekermeister,

HJ answered your original post 16 minutes after you posted it. Can't really get much better than that.

Your issue is something is causing the water to run. The flapper might...

Sanjeev,

You haven't met my wife:D:D

There is about 4 inches of copper between the valve and the escutcheon plate on the wall. I have no problem turning off the water and removing the valves myself to put on the solid covers. I did...

OK,

Gutted bathroom. Installed tiles on floor and walls. New toilet, sink and light fixture. I have 1/2 inch copper pipes(water) coming out of the wall for the sink and the toilet. They have...

Do you replace it with a Flushmate unit? I see a full replacement kit from Flushmate runs about $130. I would see no reason to put back the same crappy unit, even if it is warrantied.

I just installed the Mansfield 148-119 a few weeks ago. I thought it had the flushmate technology. I wish I had seen this earlier.

What is the warranty on this and is mansfield responsible for...

If I said "Made in China" would I be correct?

I too have an issue like this. I have a Price Pfister faucet that I need to pull apart about once a month and place plumbers grease on the o-ring otherwise it is almost impossible to pull the handle...