Search:

I found what I thought was a pinhole leak in the 1 1/2" copper stub (attached to a pvc trap) under my daughters kitchen sink. When I cut just behind where I thought the leak was, I found the split...

Here's the response I got from Toto:

The original flappers used a float to help the flapper stay up. The new flappers do not require the float.

I've submitted an email question to Toto, but in the meantime thought I might ask here since Terry seems to install quite a few of these. I installed a Drake II in April, 2012 and the tank (ST454E)...

Using the link from Toto's website, just enter your zipcode to find what delears are local to you

http://www.totousa.com/Default.aspx?tabid=185

Have you tried vinegar? If you're lucky, it will dissolve most of that corrosion.

I took a couple of pics to see if anyone can identify the drain manufacturer (the overflow cover says Kohler?) The drain itself has 2 little ears that could be used to turn out the drain, however a...

I have had good luck with GE Silicone bath caulk (almond color) purchased at Home Depot

http://www.caulkyourhome.com/ge-silicone-II-kitchen-and-bath.php

My daughters tub had an old linkage type pop up drain assembly that constantly plugged with hair, etc. My son-in-law yanked the assembly and of course a washcloth went down the drain. In order to...

I am thinking of adding a layer of 5/8 plywood leaving a smaller opening for access to the drain. I will also add some reinforcement under the area that was cutout too much. There isn't much room...

I have been picking up hints and tips from this forum for a number of years and wanted to say thanks to everyone. I decided to undertake a fiberglass tub replacement with a Sterling Vikrell...

I have replaced 2 toilets in my parents house with Toto Drakes and they have been problem free. My mom wants to replace a 3rd toilet (circa 1966) which is yellow and all I can find is Kohler San...