Type: Posts; User: xtorq12; Keyword(s):
Great, Thank you very much for taking the time to help me and for posting the pictures.
I am trying to verify if the wires are connected correctly inside of my Pumptec Plus box. The red, white and black 18 AWG wires at the bottom of the picture are what I am asking about. Please upload...
Well, I was hoping someone can look inside their Pumptec Plus (or upload a picture) and tell me if it's wired correctly. I would have to remove and disassemble the circuit board plastic cover to be...
Thanks Bob, I have that diagram in the pic you posted. All I need to do is verify that the red, white, black wires in my pic are connected correctly. I searched the Franklin Electric web site but I...
Sorry, I should have been more clear. The red, white and black 18 AWG wires in the pic are what I am asking about. They come from the circuit board inside of the Pumptec Plus box and connect to the...
All three wires come from the circuit board.
I purchased a used unit and want to make sure it's wired correctly (from the control unit circuit board to the contactor ).
Red wire is connected to front of contactor
Black wire is connected to...
The LS and GS appear to be the same except for the discharge head and motor adapter, silicon bronze vs Stainless. Also check valve components are different.
They were $435...
Sub. pump installation, securing 12/3 wire to poly pipe every 10 feet:
Should I use zip ties and electrical tape or just tape?
What is by far the best brand and grade? Is Scotch 33+ good enough?
Torque arrestor - New vs previous installation
Starter pipe - why?
Check valve at tank - why?
AMTROL'Rô Digital Control - pro's and con's Link
Ask This Old House - Well pump and supply tank
Season 4 | Episode 417
Original Air Date Week of January 28, 2006
Richard and well spe******t Dave Haynes help a homeowner repair a residential...