Awesome!! Thank you so much Rugged. :)
|
|
|
Type: Posts; User: raybigto; Keyword(s):
Awesome!! Thank you so much Rugged. :)
Hi All,
I installed a TOTO toilet 1 year ago and it has been great until recently it doesn't fill after flushing. Often I have to life the lid and pust the "blue thing" until it reacts and starts...
I just finished cutting the cast iron w/ reciprical masonary blade and wax and the two vents w/ circular masonary blade. I have to say that the circular saw was much easier. I used some rope to...
Thanks Cass, just finished cutting point 2, I'll keep updates for anyone who's following. Just realized that the slanted tub vent will block the way for the new tub. The old one had a gap that hid...
That's scary. To be rich and dead.
I had Lasik 7 years ago and I still sometimes push my invisible glasses up. Sometime my eyes tear up and sting, but I'm not sure if that's from lasik or...
http://www.terrylove.com/images/abs/nohub.jpg
If I started ABS from point 2, is the p-trap done the same way as the sink with a slip nut? Otherwise I would have to VERY precise with the plastic...
With some heat I got the bronze pipe out. It was actually taped with masking tape and plummer puttied! Wow.... I cleaned out the threads with a wire brush and can got about normally. Just in...
for those following, I've decided to remove the T and replace with ABS and connect to the Vent above and Cast Iron below. Then attach a marvel fitting... Thanks all for your help.. I probably...
I posted a diagram at my other post. Both the sink drain and bathtub drain tie in and connect to a main 2"... Thanks for all your comments. Here's the link...
...
Here's a close up of the planned cut location #2.... Last check before it's a done deal <deep breath>.
Thanks for the replies guys. I drew up a diagram showing different points I'm considering cutting. It seems cutting at location 2, 3 and 4 would allow me to fill in with PVC (banded coupling at...
In redoing our bathroom, I found a chrome 1.5" pipe connected to cast iron. Is there a fitting out there to connect the chrome to pvc? Or is it best for me to remove the chrome piece? The chrome...
Here's another photo with a different angle.... Hope I don't have to redo the cast iron section.
Hi Everyone,
This will be my first post here. This forum is awesome. Here goes.... In removing the old tub at home, I found the tub drain connection "glued" to the p-trap. The photo shows the...