(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: Failure2Comply; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.28 seconds.

  1. Someone installed an warp disc limit (180F "Flue...

    Someone installed an warp disc limit (180F "Flue Draft Spillage") switch on your barometric relief damper. They must have had a venting issue and band-aided the problem.
  2. Sounds like a children's book. :D

    Sounds like a children's book. :D
  3. Replies
    9
    Views
    1,818

    If this is the case I would be calling his...

    If this is the case I would be calling his supervisor and file a formal complaint. Without putting gauges on and taking multiple temperature readings all he could do as guess, and that is not...
  4. Replies
    6
    Views
    1,703

    You can zone a single unit system, but dealing...

    You can zone a single unit system, but dealing with the amount of cold bypassed air can be an issue. It is very easy to grow mold in a zoned system because of the bypass. When you bypass high volumes...
  5. Carrier bought Bryant, Day and Night, and Payne...

    Carrier bought Bryant, Day and Night, and Payne many, many years ago and became BDP under the Bryant label. All of those companies go back to the early 1900's and were reputable companies on their...
  6. Replies
    9
    Views
    1,555

    One of the wires from the outdoor unit should go...

    One of the wires from the outdoor unit should go to "Y" and the other to "C", which is "common" on your low voltage transformer. Look a the wiring diagram in the outdoor unit and see what factory...
  7. The flame is composed of two sections, the outer...

    The flame is composed of two sections, the outer section and the inner section called the mantle. The mantle should be very well defined and approx. one inch tall. From your pictures it appears that...
  8. I would recommend replacing all at the same time,...

    I would recommend replacing all at the same time, more cost effective plus the higher efficiency will save on utility dollars. I am a big fan of efficiency while keeping it simple, less to go wrong....
  9. Replies
    7
    Views
    1,693

    Please post a name brand, model number and serial...

    Please post a name brand, model number and serial number of this unit.
  10. When considering any variable speed "ECM" motor...

    When considering any variable speed "ECM" motor check the replacement costs before deciding, it just might scare you. Even though you can purchase the module separate from the motor they are still...
  11. Replies
    12
    Views
    2,162

    As mentioned your drain pan is overflowing and...

    As mentioned your drain pan is overflowing and that is what is shown on top of your furnace. Since a furnace is a "blow-through" coil a trap is only needed if local codes call for it but it is a good...
  12. Replies
    7
    Views
    1,693

    If you are trying to describe your "Combustion...

    If you are trying to describe your "Combustion Fan Motor/Inducer Motor" then if the motor has the voltage listed on the motor nameplate feeding it (230v) and it does not run, verify the voltage from...
  13. Sorry for the issues that you have, Weil McLain...

    Sorry for the issues that you have, Weil McLain makes some great standard boilers. I would NEVER buy any boiler with an aluminum heat exchanger, stainless steel is what I would choose. Those high...
  14. Replies
    6
    Views
    1,845

    I have not dealt with one in a while so not sure.

    I have not dealt with one in a while so not sure.
  15. Replies
    6
    Views
    1,845

    GE "Zoneline" PTAC units are in my opinion the...

    GE "Zoneline" PTAC units are in my opinion the finest made. It is tough to beat their quality and warranties.
  16. Replies
    1
    Views
    1,099

    Do you live in an area with sufficient high winds...

    Do you live in an area with sufficient high winds to worry about the unit sitting on the 6" pump-ups? I would be more worried about the shoddy job they did on the pad.
  17. Since you primarily heat with wood an evaporative...

    Since you primarily heat with wood an evaporative humidifier such as an Aprilaire 600 Bypass humidifier will not work to meet your needs. You need a steam humidifier such as a Honeywell. It will be...
  18. Replies
    8
    Views
    4,459

    The correct answer is what the "Heat Load" that...

    The correct answer is what the "Heat Load" that they should have run on "YOUR HOUSE" computes the heating and cooling requirements to be. I am in favor of two stage 80+ furnaces, simple, yet...
  19. "R" is HOT from the transformer, "Y" = cooling,...

    "R" is HOT from the transformer, "Y" = cooling, W1/W2 = first & second stage heat ( or W2 = auxiliary heat if heat pump), "G" = fan, "O" or "B" (if Rheem/RUUD) = reversing valve, and "Common" most...
  20. Replies
    11
    Views
    2,908

    First listing a manufacture name, model number...

    First listing a manufacture name, model number and serial number to start. The black on the PVC is mold, mist with a mixture of bleach and water AFTER you install a proper "J" trap. I would have an...
  21. If your Honeywell Zone valve is very old a...

    If your Honeywell Zone valve is very old a replacement is a good idea. It should contact the end switch when moved to the "manual open" position.
  22. Replies
    1
    Views
    917

    Sounds like the outdoor fan bearings are going...

    Sounds like the outdoor fan bearings are going bad, I would also replace the run capacitor. A twenty-five year old unit is a Trane branded GE Weathertron, great unit for its time. It is a 10 SEER if...
  23. Replies
    3
    Views
    1,188

    Excellent review. I too just replaced a builder...

    Excellent review. I too just replaced a builder grade toilet with the Toto Drake 1.6gpf, elongated, ADA, with the soft close seat ( the seat is worth every penny). These toilets are high quality and...
  24. Update: Well I took everyone's advice and I...

    Update:

    Well I took everyone's advice and I installed today with the help of my son-in-law a Toto M#C744EL-01 Bowl, a #ST743S-01 Tank, a #SS114-01 Soft Close Seat. This is the nicest toilet I have...
  25. It must be the "S" model as I confirmed it was...

    It must be the "S" model as I confirmed it was 1.6gpf.
Results 1 to 25 of 29
Page 1 of 2 1 2