(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: TwLloyd; Keyword(s):

Search: Search took 0.12 seconds.

  1. oh well, I guess I've hit a dead end... hopefully...

    oh well, I guess I've hit a dead end... hopefully it will get better over time. I will tell my wife what you said ;)

    Thanks again for all your help, it wasn't easy, but you saved me a couple...
  2. Any suggestions to speeding along the process in...

    Any suggestions to speeding along the process in the water heater? Or will the soft water break it down in a reasonable amount of time? (My wife is REALLY concerned over the rust in her hair) Its...
  3. Yep!! That took care of most of the smell. ...

    Yep!! That took care of most of the smell.

    I will do a regular regeneration, then an Iron Out regeneration, then a regular regeneration and maybe another bleach regeneration if it still seems...
  4. Progress

    Gary,

    I took out the injector, cleaned the pinhole with a tooth pick, didn't get much of anything out. I then stuck the tooth pick in the throat, got just enough resistance to notice there was...
  5. Gary, I could not figure out how to get the...

    Gary,

    I could not figure out how to get the throat out. I didn't want to pry or pull too much, there was no obvious way for it to come out easily. I did not pierce the pinhole with anything,...
  6. Improvement but no soft water

    Yes, I meant the drain line, but neither lines are kicked or blocked. I took everything apart again, took off the whole assembly, took off the control board/box soaked the entire valve unit in...
  7. I will tear it apart again this evening. The...

    I will tear it apart again this evening. The brine line isn't kinked, I can taste salty water in it so the salt is getting that far at least.

    I'm not sure what or where the injector is. As far...
  8. Hi Gary, Thanks for lightening fast...

    Hi Gary,

    Thanks for lightening fast response!!! I can't imagine its plumbed backward, it worked fine for 15 years and things go back together only one way.

    The unit is metered and the issue...
  9. Culligan Mark 100 soft-minder

    Hi

    Our softener is about 15 years old on well water. For the most part, it has worked fine. I found if I add one bag of Rust remover to 3 bags of salt there is very little rust buildup in the...
Results 1 to 9 of 9