Search:

We've got three of them. Initially the wiggle surprised me, but it hasn't been an issue for us. We like the seats.

Issue resolved.

On first toilet removed valve cap and cleaned refill nipple. It was somewhat restricted. When this only partially resolved issue, I replaced the refill tube. That did it, bowl...

I installed three 1.28 Drakes with Korky 528T fill valves in early 2009. In varying degrees the bowls in all three no longer fill as high as they once did (and should). In all cases the tanks...

What’s the difference between Korky fill valves TSU07A-5 and 528T? Apparently Korky TSU07A-5 was (perhaps is) the factory installed valve. And Korky 528T is the recommended replacement valve. Both...

After a weak (incomplete) flush I removed the lid and observed that the tank had not refilled per the Installation Instructions. But it's inconsistent, sometimes the tank refills as specified.

Few days ago I noticed the tank refill level on our new Drake varies from flush to flush. It ranges from a half inch or so below the overflow to about an inch lower. When low the bowl doesn’t...

Just removed what I believe is the original toilet (home built in early seventies) from the main floor bath to install a Drake. Flange and surrounding tile floor are rock solid with zero sign of...

Except for a Drake, I’m struggling with the same decision, 1.6 or 1.28. My question, if they both work equally well, and are the same price, why would anyone purchase the 1.6? And, if they're...