Search:

I went back to check on it, and squeezed my hand underneath the front right section next to the drain, and there is no mortar bed there. Is this normal? However, I took another photo which does show...

Can you tell whether there is a mortar bed in there based on the photo?

It's a Maax Modest:

http://www.maax.com/en/Products/ProductInfo.aspx?Brand=8&CodeCategory=B&ProductType=1&Product=288


This is what the instruction manual states: "To provide additional...

Can anyone tell me whether this tub has a mortar bed judging from the photo? I don't have access so stuck my camera through the side and took this photo:
...

Yes. Is that bad?



OK, so I'm only off by 6" then. Not as bad.



I was thinking of doing that, but then where the hose would bend would cross the valve trim a bit. (assuming using a wall...

Well, there is a plywood-type bottom plank underneath the bottom of the tub, but maybe that's just done for packaging. Not sure. I think this may be a misunderstanding because the plumber's assistant...

Ah, so I messed up. I hope I didn't also mess up by putting the outlet for the hose 12" below the valve. Is that normal?

The plumber asked me what I wanted and I said make it 48" high. It's a hansgrohe thermobalance II for tub and handshower. My thinking was that the bath is rarely used, and when it's used it's to...

The question is how do I know the good plumber from the bad one? This plumber came on the recommendation of my GC so I used him. He's going to be back tomorrow to do the tub install and I won't be...

My plumber's assistant said he was not going to do a mortar bed when I asked him. Said it's not necessary since it's going to be supported by the 2x4s on the long side of the alcove. I checked the...

Is the cord on the right side? If I put the outlet on the right side is the cord retractable so the unused part is tucked away? Thanks.

I'm thinking of getting a Toto washlet but don't have a nearby outlet. Should I put the new outlet on the left or right side of the toilet? Thanks.