Search:

Tab--why did you not tell him to stop, your tearing up my yard?

Ron, if your handy you could make up a new lid with a round access hole and buy a poly riser and lid from someone like Polylok , or other suppliers. They are about 24inch dia and you can size them...

Can short --say 6 0r 8 inch long SCH 80 with male pipe thread on one end and blank to make a glue join on other end be purchased somewhere? LB

I been thinking about getting one of the "WELL-VU" brand setups. They have a 500 ft complete kit for about $2800. I can see so many uses in this type situation--plus for fishing tools and pumps...

Just wondering----what would be the cost for someone to run the camera down and make a tape of a well this depth? If it's not too high might be better to do it just for sake of covering all the...

Troubleshooting a system with 1.5 hp, made in the late 80's, Red Jacket with the Red Jacket made motor. Does anyone have actually knowledge if a Franklin 1.5 hp control box will run this motor? ...

Will toss in a free heat shrink splice kit with a 400 ft order. Shipping will be actual cost--no extra handling fees. No sales tax out of state shipments. howardbackhoeandsupply.blogspot.com/ for...

Ideal brand is the best, but had some problems with their clamps just the other day. Repaired a water line leak in a yard and used 4 Ideal clamps. Had to go back and dig it up again as was leaking...

You might make yourself a 1 1/4 tapertap out of a pipe thread die by welding a tapered nose cone on it to guide it into the coupling your trying to hook. You need to run it down on solid pipe so you...

Anyone have experience with this product for going thru concrete, and if so was it positive? What's the best way to drill a hole in a basement wall for this item? LB www.noleaks.org

Ray, My personal waterwells have Franklin 1 hp motor operated pumps and have been untouched for over 20 yrs. Somedays I use as much as 1000 gallons due to watering livestock. That's on a tank with...

Do you have a submersible pump, or one up top? If your pumping the well down to the intake level you should have more indication of that than just some air in the system, I would think. LB

The line from the pitless to the tank runs underground in most cases. In case of a small leak in the pipes in your well and a small leak in the underground pipe and while the pump is not running...

Yep---plastic inside, like everything else. Only advantage to the metal top is you don't have to worry about cracking it when you screw something into it. Otherwise might as well be plastic too....

We can ship you a bronze top Goulds with Franklin motor. 1 hp will cost about $550 with shipping included. Will also include a free splice kit. Google our website "Howard Backhoe and Supply" ...

If you get interested in a Goulds with Franklin give me an email and I'll quote you a pretty good price. Toss in a free splice kit and free ship too. howardbackhoeandsupply@yahoo.com

Neighbor, do it yourself type, pump out. Replaced P switch, no luck, so went to town and got a new control box and installed with nothing still. Ask me what I thought so I had a look. Lid on old...

Those pumps are made by Sta-Rite. We have a wholesaler nearby that sells both those. Could I interest you in a new Goulds? 3/4 hp, 10 gpm, brass top and bottom, Franklin 2 wire motor....

ttracy--I don't think your going to have any problems with your 50 second run time. That 50 seconds is only if your not drawing water while your pump is running. Alot of time you will be using water...

[QUOTE=dtbmous;145499]I have an 825 foot deep well. The well driller feels that the recovery rate of the well at 825 feet is 5 to 6 gpm. The well has a deep static level around 400 feet. At present...

20 to 40 yrs is most common for a submersible to last in my area. Still a few Reda pumps down. And you know how old they are. That's not using switching or speed control other than a pressure...

New 1 hp 10 gpm Goulds, installed on your pipe and cable $995 plus tax. Includes labor. Need new pipe? Sch 80 Eagle Brand PVC, add .70 per ft. Couplings $1 each. Cable for the Goulds 2 wire...

Just a little comment on your tank setup. I have an underground storage tank kind of like your going to set up. I made mine out of a new 1500 gallon cement septic tank. I buried it about 6 inches...

I'm with Mr. Lee on this one. I had a 2 hp farm use motor that had a problem like yours. You hit the switch and maybe it starts and maybe it hums. You shut of and hit it again or maybe again it...

I notice you say seems to be on. So it must be a submersible pump? Otherwise you would really be sure it was on. You didn't say too much pressure was being made so either the pump has a problem and...