Search:

Thanks for the links.

IMO the Kohler Rochelle is hands down the best looking toilet I have seen to date. It's too bad they are expensive to fix, but mine were installed in 1973 and still look great. They are color matched...

I have a triple basin Elkay Cuisine Decor stainless steel sink which uses a thin zink nut to hold the cup assy (my terminology) and drain to each basin. The first nut failure was on the left (most...

I am reluctant to attempt a valvet replacement as I don't understand what makes it seal in the fixture. The bottom of the seat seems too hard to compress against anything for a seal.

My drip is back but sensitive to turnoff force. A gentle turnoff works but just a slight extra touch and it drips. I am wondering how it works since when removed I have both stem with washer and...

Before buying a new stem assy I went to Lowes to try a different brand of washers. Turns out they sell Danco which is made in Taiwan. before I got in the checkout line I ran into a friend that I...

The drip has all but stopped. I have to check it and maybe turn the handle just a tad after it cools off. I am now thinking the Ace faucet washers are just slow to seat. I suspected Chinese washers...

I have the Kohler Lady Vanity. It has gold plated 8 Inch spread faucets and swing spout with amber acrylic handles and shampoo sprayer. The hot water faucet has a stubborn drip even after new washer...

A new problem the 51344 shaft eases out to the point that it hangs the lift mechanism. If I push it back in place it stays for a few days then creeps out again. I haven't tried pulling it all the way...

I have an Elkay bar faucet with two quarter turn handles. It was installed in 1973 and has just begun to drip on the hot water side. I removed the handle and the crown nut but cannot get the...

I have a new problem, the ball arm oscillates on occasion and makes weird thumping noises. I altered the intensity of the oscillation by placing a rubber band around the arm and the valve.

I too...