Search:

I am installing washer and I want to add safety automatic shut off valve.
I found this: http://www.amazon.com/Floodstop-Washing-Machine-Valve-Shutoff/dp/B000GF5DR4/ref=pd_sim_sbs_hi_1

Does the...

I am not sure how old is it, it came with the house. I thought it drains a steam so I dumped it directly into drain, but water runs from it. I'll check the unit, could be broken. Thank you, Michal

I have Insinkerator instant water dispenser, the faucet broke and new one is expensive. Friend gave my one, but it's different brand. Mine faucet has a 4 lines, his only 3. I have extra line - vent...

Thank you, I think I got it.

I installed moen faucet today http://www.moen.com/shared/pdf/commercial/ca84004sp.pdf. The handles turn the same way, respective the cold turns wrong way. I'll call moen tomorrow, but if anyone knows...

Full re piping is planned for next year. Any recommendation for manufacturer, type etc? The main is in 3/4", house has 3 baths, one kitchen. Thank you.

My friend has a problem with plumbing. The main water line from the street is in old rusted galvanized pipes, the house is fully in copper.

He experiences a lot of clogging. Sediments of rust are...

HJ - it rotates and pulls
more pics, hope it helps. If better quality is needed I'll use better camera tomorrow
thank you Michal

Btw. is it common practice not to use teflon tape/sealant on adapter threads and just fill those with melted silver instead? I noticed it on both valves - never seen it before.

No I still need to figure out what it is. I remodel 2 baths - one get new valve, other will keep existing. HO wants leave the valve and just change the plate and handle. Anyone? Thank you Michal

more pics here:

I'll post more pics on Monday.
thank you Michal

does anyone know what type/model is this shower valve? thank you Michal

you do not need to replace it. Disconnect the hose from the valve, put it back and turn the valve SLOWLY open.

http://www.bathroomdrain.com/trench-drain-installation.html

thanks, I'll look for it
Michal

I am working on kitchen remodeling. There’s gas cooktop, 7” tiled backsplash behind and wooden top. The wooden top will 1/2” overlap tiles above the cooktop.
The question is:
Is it safe to have a...

Hi guys,
My friend asked me for advice about his tub. It’s made of faux marble and it has crack on the bottom. The crack is approximately 12” long and ends at the drain opening. I do not know how...

Thanks guys,
The vents are within few feet. I The drains tap into 3” drain pipe which goes into main line. So what will be the proper size of the vent? I don’t live in freezing area. I’ll post some...

I have few questions.

I have 3 vents, 1 ½” from sink, 1 ½” from washer and 2” from toilet. Can I join all of them in the attic and have only one 2” coming out of the roof.

Are the water...

Thanks guys.
Lesson learned. Gas comp. came, tested it. The meter is good, the regulator had small leak, they changed it. The guy couldn’t tell if I caused it. The regulator holds up to 60 psi from...

Hi guys,
I am adding a second bath. I had to relocate few gas pipes. I tried to test it today, I was able to pressure the system only at 2 psi. I found out, the air leaks from vent at gas meter...