Search:

HI go with the clean out where you have it, ask yourself what would happen
with a clogged sink where do you want to dirty water out of and be able to run snake into ???
i like the heavy sch 40 pvc...

:)
Go To Your Local Auto Part Store The Tool Is Called A Inside
Ring Crimp Tool, It Looks Like A Pair Of Flat Needle Nose,
With Small Tips On End Just Made For These Rings:d


Macplumb ...

I disagree to one point, if the water is used as closed system the water heater will last longer,
this is according to the mfg's,
MANY WATER HEATER MFG'S NOW MAKE UNITS THAT HAVE SIDE OUTLETS FOR...

MOST PLUMBING CODES I KNOW OF "DO NOT' allow normal sewer waste pipes to run in the same trench or over the top of potable water lines,
i think if you check with your local codes, building and...

:)

FIRST off i would suggest a professional drain cleaner, or if you still want to do it yourself???

go to h/d and rent a electic power snake, 3/8" cable nothing bigger,
spread a lot of...

:D
go with the fittings as above, do not use concrete!!!

if you are relley worryed about roots growing back into line??

just get a couple pounds of rock salt and pour over your joints roots...

:)
Just read your other posts about your sink if you can possible but up with this a bit longer???

i have done mfg's service work for many years they should "PAY" a lic. plumber to replace this...

Try a very "HOT" hair dryer to soften the caulking before using the putty knife,

JERRYMAC MASTERPLUMBER:D

:D :D
To let you know he the general calif. area you don't need to have lic. to plumbing in the state as long as you are working under someone with a state contractors lic. c-36

if you have a...

[b][/

Also Use P-trap With Union This Will Let You Turn Back Against
The Wall, And Is Much More Flexable Adjustable Connection

:)
O. K. here is the stright scope on this you have 1 1/2" copper drain pipe "WHICH' will handle your washer drain O. K. they make a copper the steel or copper to plastic no hub type couplers!!...

By The Way I Have A P.h.d. In Water Heaterolgy, That Water Heater
Is Made By State Inds. In Ashford, Tenn,

Macplumb

:) :)

Don't pay any attion to what these guy's are osting about electric
that romex was appoved medod when it was installed!! and whould be grandfathered in even if the code changed in your...

:)

Yes to make vent like you show is "OK" just make sure where you do bottom,
turn over that it is above the flood level of the sink!!

JERRYMAC MASTERPLUMBER & MASTER DRAINMAN

All Bees Live In Dark Nests But They Are Still Nocternal

Macplumb
P. S. I Know This Because I Used To Work With Honey Bees!!!
And Yes I Have Gotten Strung By Both Bees And Yellowjackets

GET A HANDICAP TOILET SEAT TO RAISE 2"" IS THE SIMPLEST THING TO DO!!!:D :D

JERRYMAC MASTERPLUMBER

:)
THESE OLD GATE VALVE HAVE THE STEM STRIP OUT, LOCKING THE GATE IN THE CLOSED POSITION;
3 WAYS TO SOLVE PROBLEM
#1 CUT OPEN DRYWALL AROUND THE VALVE, AFTER CUTTING OFF MAIN
WATER IN HOUSE,...

:)

THEY ARE CALLED HOLDRITE STRAPS, AND YES THE COPPER STUP OUTS
ARE SOLDER IN PLACE TO KEEP COPPER FROM MOVEING BACK AND FORTH

JERRYMAC MASTERPLUMBER:)

Go to big box or local lumber store get expanding foam filler, late at nite seal off hole with foam, if they try to fly away they can't, because the foam
makes their wings to heavy and they stick...

Yes; thats exactly to the way it should be done; you never ever put a reduction in the pipe the way you showed the first time!!!

:) :)
JERRYMAC MASTERPLUMBER & MASTER DRAINMAN

:)

YES you have the ideal, but i would put a wye in both the shower drain,
& toilet drain, roll 2" vent off toilet line back up though wall behind toilet,
make sure wye's on both lines come...

[B][/B

:) I wish i could advertise to do medical work in my home "not" that i am qulifyted but i have seen many doctors & nurses over the years to be able to help people!!
OFF topic but i always...

you need to have a professianal plumber check out your gas switch over
a gas dryer is rated at 38,000 btu's a full size gas range is rated at 65,000 btu's gas is "NOT" sized to pressure, but to...