Search:

Thank you all for the replies. You guys are truly helpful.

I decided to go with CST744EG (same as CST744E as Terry recommended, but with something called "Sanagloss").

@jadnashua Wanted to...

I am replacing a 23-year-old toilet. The bathroom vanity countertop is 29.5" high (bottom of the countertop to floor) and is extended to over the top of the tank. The height of the existing toilet...

On Sunday I used some DAP Acrylic Latex Caulk Plus Silicone and sealed minor gaps (1/8") around the 1" water pipe where it came out of the wall in the garage. Today I found the clear caulk mostly...

That looks suspiciously look the Wilkins model 70 I just put in my house. It's only $62 at Home Depot. I advise you to replace it.

I am also a complete newbie so caveat emptor.

10 year old State Select 50 gallon gas WH. Working fine. I don't think the previous owner changed the anode rod ever. I wanted to change the anode rod but am balking for two reasons: 1) I read it...

Ok so the good news is static water pressure is stable at 55 psi. Bad news is after WH shuts off, thermal expansion pushes that up to 100 psi. Flushing a toilet drops that to 55 psi.

So if I take...

Thank you jimbo and Cass. I replaced the PRV and static pressure now is 65 psi. I will test pressure again after heating cycle.

20 year old house. I am the 2nd owner. Bought the house in May 2008.

There is a Cash-Acme EB-86 PRV just behind a gate-valve house shutoff-valve. Both PRV and gate-valve look original.

I used a...