Search:

Can I put an engineered wood floor over in-slab concret radiant heat and not affect the efficiency of the system?

Thanks guys. I appreciate your advice. I am going to install a vent tee with an elbow out to the trap and go up through the top plate. I didn't think an AAV would be a good idea.

I have an 2 pvc pipe for a vent that I am reducing to 1 1/2 inch to fit through the top plate. I am installing a vanity with an 1 1/2 inch drain. The problem is the vanity trap will be about 5 '...

I have an in-floor concrete radiant heat system. One loop is discharging water at 130 degrees from the boiler. The larger loop is discharging at 101 degrees. Is it possible for low voltage cast...

Just finished getting it installed and boy is it neat. Used a Munchkin contender boiler and it is really a neat system.

Thanks John. I really appreciate your advice. It is good to know that I can get it from a professional.

Do I need to winterize a woodford hydrant or is it frost-free? It is a y34 Woodford Hydrant.

Bob:
Thanks for your help. I am assuming your answer to the question is EPS ridgid board? I would prefer to do the PEX aspect of it myself and leave the manifold, pumps, boiler, etc. up to a...

What is the best product to use for insulating in-slab pex? Rfoil bubble or EPS Foam? Anyone have any experience with either?
Thanks for your help.
Rolfsi

I know how to rough in a water closet (12"-13" inches from the back wall and 15-16" from the side wall) and all the venting in a slab configuration. However, I would like to put in a 60"...

Does anyone know of any good resources (books, websites, or Manuals) that I can read to learn more about designing and installing an in-concrete radiant floor heating system in a metal building? Any...