I'm not a professional but I'm not willing to deal with stuff that involves this much trouble. I initially got a Cadet 3 because I thought it was a toliet that functioned pretty good at a lower...
|
|
|
Type: Posts; User: ron in sc; Keyword(s):
I'm not a professional but I'm not willing to deal with stuff that involves this much trouble. I initially got a Cadet 3 because I thought it was a toliet that functioned pretty good at a lower...
Is it cheaper as far as electricity goes to use a smaller tank, since it should take less electricity to keep less water hot?
,
Yes, I need to forget about that I checked and the wire is only 10 gauge.
The garage is well insulated because it has air conditioning and heat. It would be more trouble than I would want to undertake right not to change to 6 or 8 gauge wiring. I think I could change...
Is there any rule of thumb for distance to the end use when using an end use tankless electric hot water heater?
I an considering putting one in my garage. Useage will consist of front loader...
I don't know if your Rialto is the older model that used 3.5 gallons to flush or not but if it is I'd rebuild it. I have a Rialto that I installed in 1988 and I have no complaints. I think it's...
It might be worthwile to upgrade to 400 amp service. You would have one meter and two 200 amp disconnect boxes one going to the garage and one to the house.
I just bought a Toto Drake and installed it with little effort.
I did try repositioning the tank, I even put a like softsoap on the gasket hoping that would let it seat itself better but had no success.
I am not a professional and perhaps a professional...
For whatever reason this tank could not be tightened as designed. I was able to tighten it so tight that the tank was on the bowl on only one side. I did tighten it incrementally but with no success....
So would a Toto Drake be what I need to get. This bathroom is very tiny, only a toliet and a 32" x 32" shower and it's in my detached garage.
For whatever reason this tank could not be tightened as designed. I was able to tighten it so tight that the tank was on the bowl on only one side. I did tighten it incrementally but with no...
I brought a American Standard Cadet 3. Everything installed except tightening of tank to bowel. Directions say to tighten until tank just rests on bowl. I've tightened a fair amount and fasteners...
I bought an American Standard Cadet 3 from Lowes. When I got home and unpacked it the toilet seat was missing; I got the one that was supposed to come with everything. I called Lowes and they said to...
I just return an American Standard Cadet 3 that was finished badly. You could see where the baked on material did not cover the top of the front of the tank with the lid in place.
I just need a...
I bought an American Standard Cadet 3 from Lowes. When I got home and unpacked it the toliet seat was missing; I got the one that was supposed to come with everthing. I called Lowes and they said...
I don't know if mine has a check valve in it but the city did change it out about a month ago. The new one has a transponder/anntenna or something like that on it so they can read it without getting...
What is advisabilty for using the stainless steel braided supply line on a hot water tank?
What would you consider high water pressure?
Our code requires a pressure tank for a hot water heater, no well involved.
Is the pressure tank really necessary or is it only necessary because the code says it is?
I used to refer to them as hot water tanks, since that's what they hold.
I do have a spigot next to it that is regular water, if I do use the hot water to wash really dirty stuff like boat it sounds like I should make a connnection between the two so I can mix the hot...
I need to install water heater for detached garage, it will have to be electric.
How big a tank to I need? It will need to supply hot water to following:
-front loader washing machine, used only...
I just installed one of those air bubble type tubs and the deck size would not have been an issue because the weight of the tub is to be supported by the floor not the deck.
Should both heater elements be set to same temperature in a 50 gal lowboy tank?