Search:

I noticed the Delta toilets at HD. It looks like the two tubes on the outside of the bowl that feed the priming jet are different sizes. I've seen one tube or duel tubes the same size, but never...

Looks a lot like the Briggs Vacuity, which is not recommended. If the Briggs clogged, care had to be taken to avoid forcing sewage into the tank through the vacuum tube when plunging. Did they fix...

If you're locked into Gerber, the Avalanche is a better performing gravity-fed toilet than the Viper.

There are a couple of products that add a chlorine cartridge in the refill tube, running the chlorine down the overflow, rather than having it contact the tank parts. The priming jet at the bottom of...

Both Korky and Fluidmaster make adjustable replacement 3 inch flappers with instructions on where to set the adjustment for particular brands and models.

1778517786

Maybe this will help.

http://www.ehow.com/how_6217927_remove-aluminum-marks-porcelain-sink.html

Have you found any info indicating what specifically they changed, other than the flapper, to make it work well with 1 gallon? You said the bowl is different from the Drake II; any details? Is the...

This is the picture I saw at the Toto web site.
17233

Right-hand trip lever. Is that standard?

I have read posts recommending replacing the usual multi-turn inlet valves on toilets with quarter-turn valves, since the valve is always fully-open or fully-closed. Is there a sealing advantage to...

There are a couple of products that add bowl cleaning chemicals to the water that goes down the overflow to refill the bowl. One of those might solve your problem without the damage to tank parts.

Congratulations, Frank. Glad you got it fixed either because of or in spite of us. Since the toilet still exhibited the problem even with the water turned off, that pretty much eliminates the fill...

I have two different model Toto toilets. Water and air bubbles rise up the overflow tubes in both of them when flushed, and to two different heights, though they don't overflow.

If you're going to replace the innards anyway, see if there is a flush valve available with an overflow tube larger in diameter than the one you have now. If there is a fixed amount of air escaping...

It sounds like something may be obstructing the flow of water from the tank into the bowl, causing it to back up the overflow tube. Also, the quick flow of water into the bowl traps some amount of...

A higher water level, whether in a one-piece or two-piece model, provides higher head pressure, which means greater flushing power. However, all of the major improvements in low-flow toilet design:...

I have a 1.6 gallon Drake that has straight down rim holes, and I very rarely have a problem with skid marks. The holes, especially at the front of the bowl are large diameter, and put out a wide...

Maybe it's there to allow free passage of air in and out of the tank as the water level changes.

In the videos at the Zotran web site, it appeared as if the user simply held down the flush handle until the bowl was cleared. If that is the case, how do you know how much water is being used for...

In the videos at the Zotran web site, it appeared as if the user simply held down the flush handle until the bowl was cleared. If that is the case, how do you know how much water is being used for...

Is there some building code not being met here? Would an inspection be in order?

Korky has a video for the installation of the MPK valve, including setting the bowl fill, at their web site. If the MPK @ $10.48 can be set up for the bowl fill of a Toto, both 1.6 and 1.28 gallons,...

Anybody tried either of these two in a Toto?

So, if you replaced the original Toto fill valve on a 1.28 gallon Toto model with the Korky 528 fill valve, would it come close to matching the original water level in the bowl?

Between the two Korky replacement fill valves, the 528 and the 528T, which one directs more water down the overflow?