(206) 949-5683, Top Rated Plumber, Seattle

Search:

Type: Posts; User: mattg83; Keyword(s):

Search: Search took 0.17 seconds.

  1. Thanks for the help everybody - I dissassembled...

    Thanks for the help everybody - I dissassembled the joint, bought a new nut and washer and then reassembled with a hand tighten and then another quarter turn with the channel locks and presto - no...
  2. HJ thanks for the response. So I'll give it...

    HJ thanks for the response. So I'll give it another go with my PVC system. So for the slip joints - since both types (brass and pvc) have them does one have a better reputation? I'm pretty sure I...
  3. Slip joint on shower drain keeps leaking! Help!

    So I've recently renovated the bathroom. Including new steel tub, pluming, drains, floor, walls, etc. Now I'm trying to hook up the drain before going any further. I bought a standard pvc kit with...
  4. Replies
    7
    Views
    1,532

    HJ, the opening is between 6 and 6 1/4 in some...

    HJ, the opening is between 6 and 6 1/4 in some spots...not a perfect circle. I see @ HD they sell a 7" extension flange ring. I believe that this would sit on the outer part of this circle and work...
  5. Replies
    7
    Views
    1,532

    John, The cast iron pipe and flange are...

    John,

    The cast iron pipe and flange are removed. I cut it in the basement, about 2 ft. from the stack. I'm running new PVC all the way up to the flange. What I want to know is, I have a 6 1/4...
  6. Replies
    7
    Views
    1,532

    Nowhere to fasten my closet flange...Help!

    When putting in the new subfloor we left the old cast iron pipe/bell/flange in place (Cutting holes in the floor to work around the pipe). After cutting this out due to holes in the old pipe, the...
Results 1 to 6 of 6